Incure L44 delivers 78% more curing area than the L33 in a 4″ × 4″ array — the largest L-Series™ model that still fits within the C131C, C131D, and C141C chamber envelopes. Where the L33 covers 9 sq. in., the L44 covers 16 sq. in. in a single exposure: a full board section, a large conformal coating panel, or a multi-joint pattern too wide for the L33 to reach in one pass. Step above the L44 to the L64 and C-Series™ chamber compatibility drops off entirely.

78% More Curing Area Than the L33 — Still Sized for C-Series™ Chambers

The L44 is 16 sq. in. versus the L33's 9 sq. in. — the same C131C, C131D, and C141C chamber compatibility, but with enough area to cover 4-inch assemblies in one uninterrupted pass. The L64, the next model up, has no chamber-compatible option: moving to the L44 is the last opportunity to gain area while retaining controlled-environment batch cure capability.

Maximizes Throughput in Chamber-Based Processes

In a timed batch process inside a C-Series™ chamber, cure time is fixed by the adhesive, not by the lamp area. The L44 fills that fixed time window with the widest possible irradiation zone — curing more assembly area per cycle than any other L-Series™ model that fits the chamber. For processes that run multiple cure cycles per hour, the larger footprint directly reduces the number of repositioning steps per batch.

3,100 mW/cm² Across a 4″ × 4″ Area (144 LEDs at 385/395/405 nm)

144-LED array; peak irradiance at 2″ working distance: 3,100 mW/cm² at 385 nm, 395 nm, or 405 nm; 2,600 mW/cm² at 365 nm. Static uniformity 0.78 at 2.0″ working distance. Wavelength factory-configured at order (365 / 385 / 395 / 405 nm); LED life rated at greater than 20,000 hours.

Irradiance values measured at 100% output intensity at the specified working distance. Peak intensity at 385/395/405 nm configurations exceeds 365 nm output for the L44 array — this is a characteristic of the LED die efficiency at these wavelengths. Static uniformity measured as minimum/maximum intensity ratio across the irradiation area. LED lifespan rated at greater than 20,000 operating hours under standard conditions; no recalibration or bulb replacement required during normal service life. The L44 is the largest L-Series™ model compatible with Incure C131C, C131D, and C141C chambers; larger models (L64 and above) do not have a chamber-compatible option in the C-Series™ range.

Related Products

Incure L33

The next size down — a 3″×3″ array in the same chamber-compatible tier.

Incure UV Cure Chambers

C131C, C131D, and C141C are all sized for this lamp's footprint.

Vison™ UV Eyewear

ANSI Z87.1 / EN166 eyewear rated for L-Series™ 365-405 nm LED output.