The Instant “Third Hand”: Temporary Fixturing for High-Precision Manufacturing
In manufacturing, precision alignment is non-negotiable, but waiting for fixturing equipment or long-curing epoxies to set can grind production to a halt. When assembling complex, multi-component parts, technicians need a fast, reliable method to temporarily lock components into their exact position—allowing them to move on to a slower, more permanent assembly step (such as applying a two-part structural epoxy, welding, or specialized heat curing) without clamps or jigs.
Cut the complexity and increase throughput with a strategic fixturing solution.
INCURE GapFill™ D95 General Purpose Instant Adhesive
The INCURE GapFill™ D95 is the perfect choice for temporary fixturing. It offers lightning-fast cure speed and sufficient strength to hold components securely in place while the primary bonding agent or process is completed. Its general-purpose formulation bonds quickly to almost any engineering substrate.
| Feature & Benefit | Technical Insight for Fixturing | Conversion Value |
| Ultra-Fast Fixture Time | Achieves handling strength in just a few seconds on most common materials (e.g., metals, plastics, rubber). | Instant Alignment: Dramatically speeds up your assembly process by eliminating clamping wait times. |
| Versatile Material Bonding | Excellent adhesion to a broad spectrum of substrates, including diverse plastics and plated metals. | All-Purpose Reliability: Confidently fixture any component, regardless of material. |
| Low Viscosity Option | Can penetrate minute gaps between closely-fitting parts to secure the alignment instantly. | Precision Holding: Locks components without shifting or creeping during the final assembly stage. |
| Compatibility | Does not typically interfere with the final, bulk adhesive cure (e.g., structural epoxies or polyurethanes). | Seamless Integration: Use it for fixturing without compromising the integrity of your permanent bond. |
Application Steps: Securing Alignment in Seconds
Preparation (Maximize Speed): Ensure the mating surfaces are clean, dry, and free of release agents or grease. Use an accelerator/primer on difficult-to-bond plastics if required to ensure instant grab.
Application: Apply a small dot or thin bead of GapFill™ D95 to one of the mating surfaces where the final, permanent bond will not be applied, or to a corner/edge of the component to be fixtured.
Assembly: Immediately press the components together into their precise final alignment. Hold pressure for 5 to 10 seconds until handling strength is achieved.
Final Assembly: Proceed with your primary bonding process (epoxy application, welding, etc.) now that the components are securely fixtured without movement.
Stop wasting time on clamps and maximize your operational efficiency.