In quality control (QC) and metrology, achieving precision measurement demands that the part being inspected remains absolutely static and perfectly aligned on the measuring device (e.g., CMM, optical comparator, or vision system). Traditional clamping can induce stress, causing slight deformation or obscuring critical measurement points. Conversely, specialized custom jigs are expensive and time-consuming. QC professionals require an instant, non-deforming, and residue-minimal method for temporarily fixturing components during the inspection phase.
Don’t let unstable fixturing or induced stress skew your critical measurement data.
INCURE GapFill™ D60 Low-Odor Adhesive for Close-Fitting Parts
The INCURE GapFill™ D60 is the ideal choice for temporary QC fixturing. It’s a low-blooming, low-odorcyanoacrylate, meaning it minimizes the white powdery residue (blooming/frosting) often associated with instant glues, which is critical when performing optical inspections. Its fast cure speed instantly locks parts in place without the heat or stress associated with mechanical clamps, ensuring the part’s geometry remains true for accurate measurement.
| Feature & Benefit | Technical Insight for Metrology Fixturing | Conversion Value |
| Low Odor & Low Blooming | Formulated to significantly reduce white residue, maintaining a clean inspection area and ensuring clear optical measurements. | Flawless Inspection: Keep your optics clear and your measurement results pristine. |
| Instant, Rigid Fixturing | Provides handling strength in seconds, creating an immovable, temporary bond to the inspection plate or mounting jig. | Lock Down Accuracy: Ensure zero movement during the measurement cycle for reliable data. |
| Ideal for Close-Tolerance Parts | Optimized for small bond gaps typical in precision parts, achieving a strong hold with minimal material. | Minimal Footprint: Secure parts firmly without a bulky application that interferes with measurement access. |
| Easy Post-Inspection Removal | Its bond can typically be separated with mild force or a debonding solvent, simplifying cleanup without damaging the base plate. | Quick Turnaround: Easily release the part and prepare the surface for the next inspection. |
Application Steps: Securing Components for True Measurement
Preparation (Optical Clarity): Clean the mounting surface and the component’s bonding area with an appropriate solvent (e.g., IPA) to remove dust and oils. This step is vital to prevent residue and ensure a clean bond.
Application: Apply a small, controlled drop of the GapFill™ D60 to the area of the part that will contact the inspection plate/jig. Focus the application on non-critical, easily accessible areas.
Assembly: Immediately place the part onto the inspection plate in the desired orientation. Apply light pressure for 5 to 15 seconds to instantly lock the part in place.
Measurement: The component is now rigidly held without mechanical stress, ready for high-accuracy measurement via CMM, laser, or vision systems.
Stop guessing and maximize your measurement confidence.