In precision manufacturing and electronics assembly, alignment jigs are the bedrock of quality control, ensuring components are placed with sub-millimeter accuracy. A loose or shifting jig can lead to catastrophic yield loss and time-consuming rework. Securing these guides needs an adhesive that offers instant fixture strength to withstand assembly pressure, is easy to apply and remove without damaging the base plate, and cures cleanly to maintain a spotless working environment.
Don’t let a drifting alignment jig compromise your assembly precision and product quality.
INCURE GapFill™ D06 Low Viscosity Wicking Grade Cyanoacrylate Adhesive
The INCURE GapFill™ D06 is a wicking-grade, low-viscosity cyanoacrylate perfectly suited for securing alignment jigs. Its fluid nature allows it to wick into tight gaps after the jig is perfectly positioned, securing it instantly without the need to lift or shift the part for adhesive application. This ensures the jig is locked down precisely where intended, offering rapid, clean, and reliable fixturing.
| Feature & Benefit | Technical Insight for Jig Fixturing | Conversion Value |
| Wicking Action (Low Viscosity) | Flows readily into the minute gaps between the jig and the mounting surface after perfect alignment is achieved. | Perfect Alignment: Lock your jig in place without lifting or disrupting its zero-point position. |
| Ultra-Fast Cure Speed | Achieves handling strength in seconds, maximizing assembly line throughput and minimizing setup delays. | Instant Productivity: Secure the jig and begin assembly immediately, eliminating waiting time. |
| Clean, Residue-Minimal Bond | Cures to a thin, rigid bond that is easily removable, requiring minimal cleanup for the next setup. | Spotless Workspace: Maintain a clean work area, critical for high-precision electronics assembly. |
| Strong Temporary Hold | Provides sufficient shear strength to resist the forces exerted during manual or automated component placement. | Zero Movement: Guarantee your jig stays rigidly fixed, ensuring repeatable component alignment. |
Application Steps: Instantly Locking Alignment Jigs in Place
Preparation (Precise Placement): Ensure the jig and the mounting surface are clean and dry, free of dust, oils, or lubricants. Align the jig perfectly on the base plate or workpiece.
Application: Using the fine applicator tip of the GapFill™ D06, carefully apply a small drop of adhesive along the edge of the jig where it meets the mounting surface. The low viscosity will instantly wick into the tiny gap by capillary action.
Curing: Hold the jig steady for 5 to 10 seconds while the adhesive cures. The wicking action instantly locks the assembly into its precise location.
Assembly: The jig is now securely anchored and ready to guide components. To remove the jig later, apply localized heat or a suitable debonding solvent to break the small, thin bond line.
Stop using cumbersome clamps and maximize your assembly speed and precision.