A linear strip beam is the right tool for a seam that runs in one direction — but a bond interface that spans both length and width needs a beam head built for two dimensions, not one repositioned twice.
The M-Series™ Configuration for Interfaces With Length and Width
The Incure M62 is a UV focused beam curing system stepping up from the M51’s 1-inch-deep strip to a 6″×2″ beam area — the M-Series™ configuration built for bond interfaces that span both length and width. Where the M51’s narrow geometry keeps energy on a single seam line, the M62’s 12-square-inch footprint covers multi-row SMD arrays, wide gasket faces, and rectangular bond pads in one uninterrupted exposure. The 108-LED array delivers 3,100 mW/cm² at 365 nm uniformly across the full 6″×2″ zone.
Coverage the M51 Cannot Reach in a Single Pass
The M62’s 2-inch beam depth covers bond interfaces too wide for the M51’s 1-inch strip. Components where the adhesive spans both a length and a width — multi-row SMD pads, wide flange bonds, partial O-ring seals — require the 2-inch coverage the M62 provides. The M51 would need two separate passes with repositioning to cover that same zone; the M62 cures it in one, on the same control architecture (foot-switch, PLC, RS232), the same auto-ranging power input, and the same forced-air platform as the rest of the line.
Confirming whether a bond interface needs the M51’s narrow strip or the M62’s wider footprint is worth checking before ordering. Email Us with the interface dimensions and Incure can confirm the right M-Series™ configuration.
A Focused Beam, Not a Flood — Even at the Wider Footprint
The M62’s 6″×2″ footprint remains a focused, defined beam rather than a flood — components, coatings, and plastics outside that 6″×2″ zone receive no UV exposure. That matters in mixed-technology assemblies where a broad bond interface sits adjacent to heat-sensitive components, pre-cured bonds, or optical elements: the beam contains the UV dose to the actual bond area and nothing beyond it, at a scale the M51’s narrower strip simply can’t cover on its own.
3,100 mW/cm² Across a 6″×2″ Area
The 108-LED array delivers 3,100 mW/cm² at 365 nm and 2,600 mW/cm² at 385/395/405 nm, both at 2.0-inch working distance; recommended curing distance is 1–3 inches. Wavelength is factory-configured at order. This is the same intensity level the wider M122 configuration holds across double the length — proof that scaling the M-Series™ up in size doesn’t have to come at the cost of irradiance, as long as LED count scales with footprint.
Control and Power
Control interface options span LCD front panel, foot-switch input, PLC digital I/O, and RS232, with timer and continuous operating modes switchable at the panel. Power input is auto-ranging 100–240 V, 50/60 Hz, cooling is advanced forced-air, and LED lifespan is rated at greater than 20,000 hours.
Also Available Pre-Integrated on the CDM™ Conveyor
The same M62 beam head available as this standalone bench unit is also pre-integrated on the Incure CDM™ UV Conveyor platform for inline processes that need this same 6″×2″ coverage delivered on a moving belt rather than at a fixed bench position. Within the standalone Incure M-Series™ UV Focused Beam Curing Systems family, the M62 sits between the narrower, higher-intensity M51 and the longer M121/M122/M152 configurations built for seams beyond 6 inches.
The Middle Ground Between Concentration and Coverage
The M62 occupies a specific position in the M-Series™ lineup worth understanding on its own terms rather than only as a step up from the M51 or a step down from the M121/M122: at 108 LEDs across a 6″×2″ area, it delivers the same per-LED areal density as the larger M122’s 12″×2″ configuration, just over half the length. That means a process that outgrows the M62’s 6-inch length but still needs exactly the same 2-inch depth and 3,100 mW/cm² intensity has a direct upgrade path to the M122 without any change in dose characteristics — the qualification work done on an M62-cured joint transfers cleanly to the M122 for a longer version of the same geometry.
Verifying Working Distance Across the Full 6-Inch Length
Because the M62 covers a full 6-inch run in a single exposure, confirming that the entire bond interface sits within the recommended 1-3 inch working distance — not just at the center of the beam — matters for consistent cure across the full footprint. A part with any warp or unevenness along its 6-inch length can put one end closer to the lamp than the other, and while the M62’s uniform LED array holds intensity constant across the footprint at a given distance, that uniformity assumption breaks down if the part itself isn’t uniformly positioned relative to the beam.
Confirming Eye Protection Before Commissioning
Operators running the M62 should confirm eyewear meets the Incure Vison™ UV eye protection rating for this output level, particularly on a fixture where the operator works close to the full 6″×2″ beam. For help matching beam depth and wavelength to a specific multi-row or wide-gasket bond geometry, Contact Our Team.
Visit www.incurelab.com for more information.