UV Adhesives / UV Curing Equipments / UV LED Equipments / UV LED Spot Equipments

Glass-to-Metal Adhesive: Incure Uni-Weld 1203 for Strong Bonds

Bonding glass, metal, and ceramic in one joint asks a lot of an adhesive. It has to wet three different surface chemistries, carry structural load, stay clear where the joint is visible, and survive the thermal cycling that expansion mismatch guarantees. Incure Uni-Weld 1203 is a light-curable adhesive formulated for strong, versatile bonds across these materials. One Adhesive, Multiple Substrates Many assemblies join more than two materials: a glass window in a metal frame with a ceramic spacer, or a lens bonded to both a metal mount and a plastic housing. Using one qualified adhesive for the whole joint removes the compatibility risk of dissimilar adhesives meeting, and it collapses several process steps into one dispense-and-cure operation. Uni-Weld 1203 is designed for that role, bonding a wide range of metals, glasses, and ceramics in a single application. Key Properties High bond strength, up to roughly 5,400 psi in lap shear on prepared substrates in one application Versatility across metals, glass, and ceramic surfaces High optical clarity, so the adhesive works where the joint is visible or in a light path Low linear shrinkage to preserve alignment and limit locked-in stress High elongation and toughness, giving the bond line the compliance to absorb vibration and expansion mismatch Thermal-cycle durability, holding bond strength through repeated temperature extremes Moisture and temperature resistance for outdoor and demanding service Rapid cure under UV, visible, or LED light Making the Joint Reliable Prepare surfaces individually. Solvent-clean glass and ceramic and, for humidity resistance, plasma-treat or prime the glass. Degrease and lightly abrade or prime metal. Choose the bond line for the mismatch. Aluminum expands nearly three times as fast as glass; the wider that gap, the more the joint benefits from a tougher grade and a controlled, slightly thicker bond line. The reasons are set out in how CTE mismatch causes adhesive bond failure. Cure with line of sight. Present the transparent element to the lamp and route a secondary cure to shadowed regions behind opaque parts. Fixture for alignment. Hold the parts in their designed relationship with spacers setting a uniform gap, and keep clamp pressure light enough not to starve the bond line. For help matching Uni-Weld 1203 to a multi-material joint and its service conditions, Email Us with your substrate list and temperature range. Surface Preparation in Detail Adhesion to glass, metal, and ceramic each depends on a different preparation, and skipping any of them is a leading cause of a joint that tests strong initially and fails after humidity exposure. Glass and ceramic: Remove all organic residue with a residue-free solvent. For anything beyond benign indoor service, follow with plasma treatment or a thin coat of an appropriate silane primer. Silane forms a chemical bridge between the glass surface and the adhesive that resists hydrolysis, which is what keeps the bond from peeling in damp heat. Metal: Degrease thoroughly, then create mechanical tooth by light abrasion or grit blasting, and where corrosion resistance at the interface matters, use a metal primer. Bond…

1 Comment
August 22, 2024
UV Adhesives / UV Curing Equipments / UV LED Equipments / UV LED Spot Equipments

Durable Glass-to-Metal Bonding: Incure Uni-Weld 1283

Glass bonded to metal has to hold through every temperature swing, every vibration cycle, and every year of humidity the product sees. The two materials fight each other as they expand and contract, and a bond that is merely strong at room temperature will not last. Incure Uni-Weld 1283 is a light-curable adhesive built for durable glass-to-metal joints. The Glass-to-Metal Challenge Glass expands at roughly 7 to 9 parts per million per degree C. Aluminum expands nearly three times faster, and even steel expands noticeably more than glass. Every heating and cooling cycle drives a shear stress into the bond line. If the adhesive is too rigid, that stress transfers straight into the glass, which has almost no ability to yield before it cracks at an edge or a flaw. A durable joint needs an adhesive with enough toughness and elongation to absorb that movement, good adhesion to both dissimilar surfaces, and stability against moisture and heat. Why Uni-Weld 1283 Uni-Weld 1283 cures under UV, visible, or LED light, and heat is available as a secondary path for shadowed regions: Low viscosity for easy application and penetration into tight joints Multiple cure options to fit different production environments and joint geometries High bond strength for structural glass-to-metal connections Tack-free cure for a clean, contamination-free bond surface 100 percent solids, VOC-free chemistry High clarity, useful where the joint is visible or in an optical path Thermal and moisture resistance for outdoor and cyclic service Rapid strength development when used with an activator, reaching most of full strength within a day Getting a Lasting Bond Prepare each surface for its material. Solvent-clean the glass and, for humidity durability, plasma-treat it or apply an appropriate silane primer. Degrease the metal and lightly abrade or prime it so the adhesive keys into the surface. Design the bond line for compliance. The larger the expansion gap between the specific metal and the glass, the more the joint benefits from a slightly thicker bond line and a tougher adhesive. The mechanism is explained in how CTE mismatch causes adhesive bond failure. Cure through the glass. Position the lamp so light reaches the bond through the transparent element, and route a secondary cure to any area shadowed by metal. Qualify with real conditions. Test coupons through the actual temperature range, humidity soak, and vibration spectrum the product will face. For help fitting Uni-Weld 1283 to a specific metal-and-glass pair and service profile, Email Us with your joint details. Typical Applications Uni-Weld 1283 bonds glass panels and sensors into machinery and equipment, attaches decorative and functional glass elements to metal fittings, secures glass components in vehicles, and joins windows and panels to metal frames in industrial assemblies. For glass-and-metal joints where viscosity and tensile targets drive the selection, the guide to matching a bonding grade to viscosity and tensile requirements is a useful companion, and the general comparison of UV-curable and two-part chemistry for transparent bonding helps when the cure method is undecided. Testing Durability A glass-to-metal bond…

1 Comment
August 22, 2024
Optical Adhesives / UV Adhesives / UV Curing Equipments / UV LED Equipments / UV LED Spot Equipments

Optical Bonding: Process Fundamentals and Adhesive Selection

Optical bonding replaces mechanical mounts and air gaps with a cured adhesive layer that becomes part of the optical path. Done well, it improves image quality, ruggedness, and alignment stability. Done poorly, it introduces stress birefringence, wavefront error, and delamination. The difference is in the process and the material. Why Bond Optics Instead of Clamping Them A bonded optic is held over its full contact area rather than at a few clamp points, which spreads load, damps vibration, and removes the risk of point stress on brittle glass. Eliminating air gaps removes reflective interfaces, raising transmission and contrast. And a cured bond locks alignment in place, holding it through shock and handling far better than a mechanical mount that can shift. The cost is that the adhesive is now optically and structurally critical, and the bond is generally permanent. Adhesive Properties for Optical Bonding Clarity and transmission across the working wavelengths, with no yellowing Refractive index matched to the substrates to control reflection Low cure shrinkage, so bonding does not move the elements or distort the wavefront Low CTE and a glass transition above the service range for alignment stability Viscosity matched to the joint: a high-viscosity grade bridges a defined gap or holds a vertical joint, while a thin grade wicks into mated surfaces Toughness to absorb vibration and thermal-cycling stress without cracking Incure formulates the Optik line of light-curable optical adhesives across this range, including higher-viscosity grades for gap-filling and structural optical joints. Running the Process Prepare surfaces. Solvent-clean glass and, for humidity resistance, plasma-treat or prime it. Clean and prime metal or ceramic mounts. Meter and place the adhesive. Dispense a controlled volume so the joint fills completely without excess squeeze-out into the aperture. Fixture for alignment and bond line. Hold the elements in their designed relationship with spacers setting a uniform gap. For a high-viscosity grade, the fixture mainly maintains position while the adhesive holds the gap on its own. Cure with line of sight. Light must reach the whole bonded area through a transparent element. Provide a secondary cure path for shadowed regions, and manage oxygen inhibition at exposed edges with an inert blanket or added dose. Inspect. Check for voids, fringes from stress, and edge fillet quality, and qualify with the actual thermal and vibration profile. The dominant long-term failure mode is stress from expansion mismatch between the optic and its mount, explained in how CTE mismatch causes adhesive bond failure. For help developing an optical bonding process for a specific assembly, Email Us with your optics, mounts, and environmental requirements. Inspecting a Bonded Optic A bonded optical joint is inspected on three levels. Visually and under magnification, look for voids, trapped particles, incomplete fillets, and adhesive in the clear aperture. Between crossed polarizers, look for the colored fringe patterns that reveal stress birefringence in the glass; a heavily stressed bond shows strong, concentrated fringes near the bond edge and predicts poor thermal-cycling life. Functionally, measure the transmitted wavefront through an interferometer before and…

Comments Off on Optical Bonding: Process Fundamentals and Adhesive Selection
August 21, 2024
Optical Adhesives / UV Adhesives / UV Curing Equipments / UV LED Equipments / UV LED Spot Equipments

Optically Clear Adhesive for Displays: How Direct Bonding Improves Readability

An air gap between a cover lens and a display panel is a stack of reflective surfaces. Each one bounces light back at the viewer, washing out contrast in sunlight and adding parallax. Optically clear adhesive (OCA) fills that gap, sharply improving a display's readability and ruggedness. What Direct Optical Bonding Does Laminating the cover lens directly to the display or touch sensor with a clear adhesive eliminates the internal air-to-glass interfaces. Because the adhesive's refractive index is close to that of the glass, light passes through instead of reflecting. The result is higher measured contrast ratio in ambient light, deeper blacks, no visible gap for dust or condensation to occupy, and a stiffer stack that resists impact and flex better than an air-gap assembly. Properties That Matter in an OCA Refractive index matched to the cover and panel glass, typically near 1.5, to suppress reflection High transmission and low haze across the visible range, with no yellowing after cure or aging Low shrinkage, so lamination does not induce stress patterns (mura) or distort the panel Adequate viscosity for the gap, with enough body to bridge the bond line without running Bubble-free lamination, achieved through vacuum lamination or careful roller technique Damp-heat and thermal-cycle stability, since a laminated stack that delaminates or clouds at the edges is scrap Incure Optik Clear Grades for Lamination Incure formulates the Optik line of light-curable adhesives, including optically clear grades with a medium-to-high viscosity suited to display lamination. These grades pair the index match and clarity a display needs with rapid cure under UV, visible, or LED light, low water absorption, and demonstrated stability through thermal cycling. The 100 percent solids chemistry leaves no volatiles that could fog the inside of the stack. Process Notes Clean and stage in a controlled area. Particulate is the enemy of lamination; a single fiber under the lens is a visible defect. Laminate without trapping air. Vacuum lamination is the reliable route for larger panels; small assemblies can be done with a controlled wet-out from one edge. Cure fully and evenly. Light has to reach the entire bonded area through the cover glass. A uniform dose prevents partial cure that later causes edge lift. Manage stress at the border. The cover glass, adhesive, and panel expand at different rates, and the edge of the bond concentrates that mismatch. Understanding how CTE mismatch causes adhesive bond failure informs the choice of a lower-modulus grade for large or thin panels. For help selecting an OCA for a specific stack and lamination method, Email Us with your panel size, gap, and glass types. Yellowing, Aging, and Damp Heat An OCA that looks flawless at assembly can turn faintly yellow after months of heat and light, and on a white or backlit display even a small color shift is visible. The property to specify is a low yellowing index that stays low after accelerated aging, typically a combination of elevated temperature, humidity, and light exposure meant to represent years of service in…

Comments Off on Optically Clear Adhesive for Displays: How Direct Bonding Improves Readability
August 21, 2024
Optical Adhesives / UV Adhesives / UV Curing Equipments / UV LED Equipments / UV LED Spot Equipments

Optically Clear Adhesives for Industrial Manufacturing

On an industrial line, an optically clear adhesive often has to bond more than glass to glass. It joins glass to metal brackets, plastic lenses to circuit boards, and windows to FR4 housings in one pass, staying clear through the plant's temperature and humidity extremes. A multi-substrate clear adhesive makes that practical. The Multi-Substrate Requirement Single-purpose adhesives force an assembly to be broken into steps: one material for the glass joint, another for the metal, a third for the plastic. A multi-substrate optically clear adhesive collapses that into a single dispense-and-cure operation, which cuts cycle time, simplifies the bill of materials, and removes the compatibility problems that arise where two different adhesives meet. To do this the adhesive has to wet and bond dissimilar surface energies, from high-energy metal and glass to lower-energy engineering plastics, and hold all of those interfaces through service. What Incure Optik Clear Grades Offer Incure formulates the Optik line of light-curable adhesives, including optically clear grades built for mixed-substrate industrial bonding: Multi-substrate adhesion to metals, glass, many plastics, and FR4 in one application, with lap-shear strength into the thousands of psi High clarity with no yellowing, so the bond works in a visible optical path Acid-free chemistry that will not corrode adjacent conductors or metals Tack-free cure leaving a clean, residue-free surface Rapid cure under UV, visible, or LED light, suited to inline production Low shrinkage and demonstrated toughness through thermal cycling Low water absorption and good moisture and temperature resistance Designing It Into a Process Confirm adhesion on your actual substrates. Plastics in particular vary widely; test the specific grade of polycarbonate, acrylic, or filled resin you use, in the surface condition it arrives in. Plasma or flame treatment lifts adhesion on difficult plastics. Set the bond line with the fixture. With a flowable clear adhesive, spacers or hard stops control thickness, which keeps optical path length and stress uniform. Cure with line of sight. Present the transparent element to the lamp and route a secondary cure to any shadowed area. Size the lamp to the part, whether that is a flood lamp or an inline conveyor curing system. Account for mismatch. When one substrate is metal and another is glass or plastic, their expansion rates differ, and the bond line takes the strain over temperature. The mechanism is covered in how CTE mismatch causes adhesive bond failure. For help qualifying an optically clear adhesive across your substrate set, Email Us with your material list and process conditions. Typical Applications Multi-substrate clear adhesives bond display and lens stacks to housings, cover glass to sensor modules, sight windows into equipment, and optical components onto printed circuit assemblies across industrial manufacturing. The broader comparison of UV-curable versus two-part chemistry for transparent bonding and the guide to matching a plastic-bonding grade to substrate and mechanical demand are useful when plastics are in the joint. Surface Energy and Plastic Preparation The reason a multi-substrate adhesive is harder to formulate than a glass-only one comes down to surface energy.…

Comments Off on Optically Clear Adhesives for Industrial Manufacturing
August 21, 2024
Optical Adhesives / UV Adhesives / UV Curing Equipments / UV LED Equipments / UV LED Spot Equipments

Bonding Metal to Glass: Selecting a High-Strength Optical Adhesive

Joining metal to glass is one of the harder assembly problems in optics and instrumentation. The two materials expand at very different rates, glass tolerates almost no stress before it cracks, and the joint often has to stay optically clear as well as strong. The adhesive choice is where the design succeeds or fails. Why Metal-to-Glass Is Demanding Common optical glasses expand at roughly 7 to 9 parts per million per degree C. Aluminum expands at about 23, stainless steel around 16, and titanium closer to 9. Bond aluminum to glass with a rigid adhesive and every temperature change drives a shear stress into the glass at the bond line. Over enough cycles, that stress finds a flaw and the glass chips or fractures at the edge of the bond. The joint also has to survive vibration, resist humidity at the interface, and, in many cases, transmit light without distortion. What a High-Strength Metal-to-Glass Adhesive Provides Incure formulates the Optik line of light-curable adhesives, including grades developed for structural metal-to-glass bonding. The properties that matter here are: High lap-shear strength, into the thousands of psi, on prepared glass and metal in a single application High elongation and toughness, giving the bond line enough compliance to absorb expansion mismatch and damp vibration rather than transmitting it to the glass Demonstrated thermal-cycling performance, holding bond integrity through repeated temperature extremes High clarity, so the same adhesive works in an optical path Low linear shrinkage for precise alignment Moisture and temperature resistance for outdoor and industrial service Rapid cure under UV, visible, or LED light Making the Joint Work Prepare each surface for its material. Glass is solvent-cleaned and, for humidity durability, plasma-treated or primed with a silane. Metal is degreased and lightly abraded or primed so the adhesive keys into the surface. Choose compliance deliberately. The wider the expansion gap between the specific metal and glass, the more the design benefits from a tougher, higher-elongation grade and a slightly thicker bond line. The mechanism is detailed in how CTE mismatch causes adhesive bond failure. Cure through the glass. Position the fixture so light reaches the bond through the transparent element, and provide a secondary cure route for any part of the joint shadowed by the metal. Control bond-line thickness. Spacers or hard stops keep the gap uniform, which spreads stress evenly and keeps optical path length consistent. For help selecting a metal-to-glass adhesive for a specific pair of materials and temperature range, Email Us with your joint geometry and service conditions. Bond-Line Geometry and Stress Distribution In a glass-to-metal joint, the shear stress from expansion mismatch is not uniform. It is highest at the ends of the bond and near zero in the middle, and the peak rises as the bond gets longer and as the adhesive gets stiffer. Two design levers reduce that peak. The first is bond-line thickness. A thicker layer, within reason, spreads the differential movement over more material and lowers the strain at any point. A very thin…

Comments Off on Bonding Metal to Glass: Selecting a High-Strength Optical Adhesive
August 21, 2024
Optical Adhesives / UV Adhesives / UV Curing Equipments / UV LED Equipments / UV LED Spot Equipments

Optical Adhesives for High-Demand Applications

Some optical assemblies never leave a climate-controlled room. Others ride in a vehicle, sit on a tower, or cycle from freezing to hot every day. When the environment is severe, the adhesive holding the optics has to keep both its alignment and its clarity through conditions that would degrade a general-purpose bond. What "High-Demand" Means for an Optical Bond Demanding service stacks several stresses on the same joint: Thermal cycling between wide temperature extremes, which flexes the bond line every cycle as the substrates expand and contract by different amounts Sustained humidity or damp heat, which can shift refractive index, cloud the layer, or attack the adhesion at the interface Vibration and mechanical shock during transport and operation Long service life, often a decade or more, with no opportunity for rework An adhesive that passes a room-temperature pull test can still fail all of these. Properties That Carry a Bond Through Hard Service Incure formulates the Optik line of light-curable optical adhesives with grades aimed at exactly this problem. The properties that matter for durability are: Low coefficient of thermal expansion and a glass transition temperature above the maximum operating temperature, so the bond stays dimensionally stable and does not soften in heat Very low cure shrinkage, which limits the stress locked into the joint at assembly Low water absorption, keeping index and clarity stable through humidity exposure Toughness and elongation sufficient to absorb vibration and shock without cracking the bond or the glass 100 percent solids chemistry with no volatiles to outgas, form voids, or fog nearby surfaces Rapid, complete cure under UV, visible, or LED light for repeatable production Designing for Durability The single biggest driver of thermal-cycling life is the expansion mismatch between the optic and its mount. A stiff adhesive maximizes alignment stability but transfers that mismatch stress into brittle glass; a more compliant grade absorbs it. The trade-off is explained in how CTE mismatch causes adhesive bond failure, and it should be settled before a grade is chosen. Beyond material selection: Prepare surfaces for humidity resistance. Plasma treatment or a silane primer on glass substantially improves the durability of the interface in damp heat. Control the bond line. A uniform, moderate thickness set by spacers distributes stress better than a thin, variable one. Qualify with real profiles. Subject coupons to the actual temperature range, damp-heat soak, and vibration spectrum the product will see, not a generic screen. For help selecting an optical adhesive for a specific environmental profile, Email Us with your temperature, humidity, and vibration requirements. Outgassing and Enclosed Optical Systems In a sealed optical assembly, anything the adhesive releases as vapor can condense on a cold optic and form a haze that scatters light. Solvent-borne adhesives are the biggest concern here, which is one reason 100 percent solids chemistry is preferred for demanding optical work: there is no carrier solvent to flash off, and a fully cured network has little residual monomer to volatilize. For assemblies destined for vacuum or near-vacuum service, outgassing…

1 Comment
August 21, 2024
Optical Adhesives / UV Adhesives / UV Curing Equipments / UV LED Equipments / UV LED Spot Equipments

Optical Epoxies: Selecting a High-Bond-Strength UV Optical Adhesive

An optical epoxy is asked to be invisible and immovable at the same time. It must transmit light without color or haze, hold precise alignment for years, and carry real mechanical load through shock and temperature swings. Getting all of that from one material means understanding what the specifications actually control. What "Optical" Adds to an Adhesive Spec Beyond ordinary bond strength, an optical adhesive is judged on a second set of properties: Transmission and clarity: High light transmission across the working wavelengths, with low haze and no visible yellowing after cure or aging. Refractive index: A defined index, often near 1.5, so the adhesive layer does not introduce reflection or distortion at the interfaces. Shrinkage: Very low cure shrinkage, because any volume change moves the bonded elements and distorts the wavefront. Coefficient of thermal expansion: A low CTE and a glass transition temperature above the service range keep alignment stable and limit stress on brittle glass. Water absorption: Low uptake, since absorbed moisture shifts index and can cloud the layer. High-Bond-Strength Optical Adhesives Incure formulates the Optik line of light-curable optical adhesives, including grades built for demanding structural optical work. These grades combine strong adhesion to glass and to metal or ceramic mounts with the clarity and dimensional stability an optical path requires. Characteristics typical of the high-strength grades include: Adhesion well into the thousands of psi in lap shear on prepared glass and metal Rapid cure under UV, visible, or LED light, including with low-intensity lamps 100 percent solids formulation with no volatiles to outgas or void Very low shrinkage and low CTE for precise, stable alignment Retention of properties through humidity exposure and thermal cycling Choosing and Using the Right Grade Match viscosity to the joint. A thin, wicking grade fills capillary gaps between mated optics; a thicker grade bridges a defined gap or holds position on a vertical surface. Match mechanical character to the stress. A rigid, high-Tg grade maximizes alignment stability; a slightly more compliant grade better survives the stress of bonding materials with very different expansion rates. The reasons a stiff bond can crack a glass element over temperature are covered in how CTE mismatch causes adhesive bond failure. Prepare surfaces properly. Solvent-clean the glass, and use plasma treatment or a silane primer where long-term humidity resistance is required. Metal mounts should be degreased and lightly abraded or primed. Cure with line of sight to the bond, hold a controlled bond-line thickness with spacers, and manage oxygen inhibition at exposed surfaces with an inert blanket or added dose. For help selecting an optical adhesive grade for a specific assembly, Email Us with your optical, mechanical, and environmental requirements. Testing and Qualification An optical adhesive earns its place in a design by passing tests that mirror service, not a single room-temperature pull. A useful qualification set includes: Lap shear and tensile on the actual substrate pairs, in the surface condition production will use, before and after environmental exposure Thermal cycling across the full operating range,…

1 Comment
August 21, 2024
Electronics Adhesives

The FIPG and CIPG Solution for Fast-Paced Production: Incure Uni-Seal 6322

On a high-volume line, a sealing material that needs minutes of oven time or a long moisture cure becomes the bottleneck. Incure Uni-Seal 6322 is a light-curable form-in-place and cure-in-place gasket material designed to seal electronic and automotive housings at the pace of automated production. The Case for Light-Cured Gaskets Traditional gasketing forces a choice between slow-curing liquid sealants and the inventory and fit problems of die-cut parts. A UV, visible, or LED light-curable FIPG or CIPG material removes that trade-off. The bead is dispensed exactly where it is needed, then cured on demand in seconds as the part passes a lamp, so throughput is set by line speed rather than by chemistry. What Uni-Seal 6322 Offers Acid-free formulation that will not corrode copper, solder, or fine-pitch conductors Low viscosity for precise dispensing into narrow channels and around tight corners Fast cure with low-energy LED lamps, suited to inline and conveyorized processes High resilience and memory retention, so the gasket recovers after compression cycles better than many cut elastomers Air-tight sealing against moisture, dust, and pressure differentials Moisture, temperature, and chemical resistance for under-hood and outdoor service Dual use as a temporary mask during conformal coating Building the Process Around It Bead and groove design. Give the dispensed bead a defined cross-section and a target compression of roughly 20 to 40 percent when the housing closes. Consistent geometry is what makes the seal repeatable unit to unit. Dispensing. A positive-displacement dispense head keeps bead volume constant as the material warms or the reservoir drains. Programmed paths hold the bead centered on the flange through corners and changes in direction. Curing. Size the lamp to the largest part so the entire bead reaches full cure in one pass. For long or complex flange paths, an inline conveyor curing system or a correctly matched UV LED flood lamp keeps cure time in step with takt. A cured gasket and a metal or plastic housing expand at different rates, so a seal that is fine at room temperature can loosen in the cold or over-compress when hot. Weighing how thermal expansion mismatch stresses a sealed joint guides the choice between a firmer and a more compliant grade. For help matching Uni-Seal 6322 to a dispense cell and cure station, Email Us with your cycle-time targets and housing geometry. Production Benefits Switching to a light-cured poured gasket typically shortens cycle time, cuts gasket inventory and scrap, reduces rework by forming the seal in one controlled step, and gives engineering the freedom to revise flange geometry without new tooling. The same material can seal a control-unit housing on one line and mask a board for coating on another. Resilience and Compression Set A gasket's job is to keep sealing after it has been compressed, warmed, cooled, and vibrated for years. The property that describes this is compression set: how much permanent deformation remains after the load is removed. A material with high compression set gradually loses its sealing force and the joint starts to leak,…

1 Comment
August 21, 2024
Electronics Adhesives

Choosing a UV-Curable Potting Compound for Electronics

Potting is supposed to be the last line of defense for an electronic assembly, but the wrong compound can crack a solder joint, cloud an optical window, or trap moisture against the copper it was meant to protect. Selecting a potting resin is a balance of optical clarity, cure speed, stress, and environmental resistance. What a Potting Compound Has to Do A potting compound fills the space around a circuit or component and hardens into a solid mass that seals out moisture and contamination, damps vibration, and holds parts in place. Because the resin touches every surface it surrounds, it has to do that without imposing damaging stress and without changing dimension as it cures or as temperature swings. Key Selection Criteria Viscosity: A low-viscosity resin flows into tight gaps and under fine-pitch components, reaching full coverage without trapped voids. Thicker grades stay put on vertical surfaces and in open cavities. Cure speed and method: UV and visible-light curable resins can set in as little as a minute under an appropriate lamp, which keeps work-in-process low. Shadowed regions under tall parts need a secondary heat or moisture cure path. Optical clarity: For assemblies with LEDs, sensors, or inspection requirements, a transparent resin keeps components visible and lets light pass without loss or color shift. Shrinkage and water absorption: Low linear shrinkage limits internal stress and warpage; low water absorption keeps dielectric properties stable in humid service. Chemical resistance: Grades resistant to mineral oils, fuels, and gases suit automotive and industrial environments. Substrate adhesion: Good bonding to metals, glass, and ceramics keeps the pot anchored to the housing. The Incure Uni-Seal line includes light-curable potting and sealing grades across this range, including higher-temperature options such as Uni-Seal 6213HT for chemically aggressive or hot service. Applying Potting Compound Correctly Start with clean substrates. Flux residue, oils, and mold release all interfere with wetting and adhesion, and ionic contamination left under the pot can drive electrochemical migration in humid conditions. Control the pour and the cure: Degas the resin, or vacuum-pot, to eliminate bubbles that concentrate stress and lower dielectric strength. For deep sections, cure in steps to keep the exotherm and shrinkage stress under control. Verify that light-curable resin in shadowed areas receives the secondary cure cycle. Check cured hardness against the datasheet before releasing parts, and pull periodic cross-sections to confirm void-free fill. Because the resin and the components expand at different rates, thermal cycling is the toughest test of a potting job. Reviewing how expansion mismatch causes cracking and delamination explains why a low-shrinkage, appropriately compliant resin outlasts a harder one in cycling service. When clarity is the priority, the same considerations that apply to transparent bonding adhesives apply to clear potting resins, and matching the resin to a correctly sized UV LED flood lamp ensures full through-cure. For help selecting a potting grade for your assembly and cure equipment, Email Us with your requirements. Clear Versus Filled Potting Resins An unfilled clear resin keeps components visible for inspection, lets…

1 Comment
August 21, 2024