Most facilities buy UV-rated eyewear once and assume the problem is solved. The protection actually depends on what happens afterward: whether a pair is at the station when the lamp fires, whether its lenses are still unscratched, and whether everyone near the lamp is wearing one. Q: What Should a UV Eye Protection Policy at a Curing Workstation Cover? A: Where Eyewear Lives, Who Wears It and When, and How It Is Checked, Cleaned, and Retired A workable policy assigns certified eyewear to each curing station rather than to a shared cabinet, defines every task that requires it, sets a pre-shift visual check, specifies cleaning and storage, and lists the conditions that retire a pair. Incure's Vison™ eyewear is used as the reference here: it blocks 99% of UV across UVC, UVB, and UVA, carries both ANSI Z87.1 and EN166 certification, and uses impact-resistant polycarbonate lenses in a wraparound frame. Choosing eyewear is a separate topic, covered in Incure's guide on how to choose UV eye protection for a curing station; this article covers keeping that choice effective day to day. Assign Eyewear to the Station, Not the Cabinet Eyewear that has to be fetched is eyewear that sometimes is not fetched. Keep at least one pair at each curing station, in its case, within reach of the operator position. On a floor running mixed equipment, a single standard simplifies this: Vison™ protection is not specific to one lamp type, covering Incure's 365, 385, 395, and 405 nm LED sources as well as mercury arc and xenon systems. One part number on every station also makes reordering and audits simpler. Define Who Wears It and When The policy should name tasks, not just job titles. Typical entries drawn from Incure's equipment lines include: Spot lamp operation. Spot lamps such as the L9000™ concentrate high-irradiance output into a narrow beam, a hazard even from brief or indirect exposure. Flood lamp work. Flood lamps expose a wider area, where the wraparound frame's peripheral coverage matters. Cure chamber loading. Opening an Incure B/C-Series™ cure chamber carries a residual exposure risk at the moment the door or drawer opens, even though the interlock cuts lamp power. Conveyor infeed and outfeed. Both ends of a UV conveyor line are exposed at once. Maintenance. Bulb changes and output checks put technicians close to lamps that are being switched on for verification. Lab and development work. Staff mapping irradiance or developing cure schedules often work closer to unshielded curing than production operators. Visitors entering a curing area should receive eyewear at the entrance, and the policy should say so. Email Us with the Incure equipment on your floor, and Incure can help map which stations and tasks need eye protection. Build in a Pre-Shift Check Eyewear that looks intact can still be compromised. A scratched lens does not reliably block UV the way an undamaged lens does, so a quick visual check before each shift belongs in routine PPE handling. The operator holds the lenses up to…