{"id":16117,"date":"2026-05-21T10:45:27","date_gmt":"2026-05-21T10:45:27","guid":{"rendered":"https:\/\/incurelab.com\/wp\/how-temperature-cycling-affects-long-term-strength-of-ultra-high-bond-epoxy-joints"},"modified":"2026-07-13T11:25:38","modified_gmt":"2026-07-13T11:25:38","slug":"how-temperature-cycling-affects-long-term-strength-of-ultra-high-bond-epoxy-joints","status":"publish","type":"post","link":"https:\/\/incurelab.com\/wp\/how-temperature-cycling-affects-long-term-strength-of-ultra-high-bond-epoxy-joints","title":{"rendered":"How Temperature Cycling Affects Ultra-High-Bond Epoxy Strength"},"content":{"rendered":"

A joint that passes static strength testing at room temperature has demonstrated one data point in its performance story. In service, that joint will experience dozens, hundreds, or thousands of thermal cycles from its minimum exposure temperature to its maximum, and each cycle imposes stress at the bondline through differential thermal expansion between adhesive and substrate. Over time, this accumulated cyclic stress degrades the joint in ways room-temperature static testing cannot predict. Understanding the mechanism of thermal fatigue \u2014 and what formulation, design, and process factors control how fast degradation proceeds \u2014 determines whether a bonded assembly delivers its design life or fails unexpectedly in service.<\/p>\n

How Thermal Cycling Stresses an Adhesive Joint<\/h3>\n

Every material expands when heated and contracts when cooled, at a rate defined by its coefficient of thermal expansion (CTE). Structural epoxies in their cured state have CTEs in the range of 50 to 80 \u00d7 10\u207b\u2076\/\u00b0C \u2014 considerably higher than the metal substrates they bond. Steel is 11 to 13 \u00d7 10\u207b\u2076\/\u00b0C; aluminum is 23 \u00d7 10\u207b\u2076\/\u00b0C; titanium is 8.6 \u00d7 10\u207b\u2076\/\u00b0C.<\/p>\n

This mismatch means that when a bonded assembly is heated, the adhesive layer tries to expand more than the metal substrates constraining it. Because the adhesive is bonded to both substrates, it cannot expand freely \u2014 it is in compression while the substrates restrain its expansion. On cooling, the relationship reverses: the adhesive contracts more than the metal, and the bondline is under tension along the adhesive film plane. At the interface and the overlap edges where stress concentrations exist, the cyclic stress from these expansion-contraction cycles accumulates damage the same way mechanical fatigue does under cyclic mechanical loading.<\/p>\n

The magnitude of the cyclic stress depends on temperature range, CTE mismatch, adhesive modulus, and constraint geometry. Larger swings, larger mismatches, stiffer adhesive, and longer overlaps all increase cyclic stress amplitude and accelerate fatigue damage.<\/p>\n

Mechanisms of Thermal Fatigue Damage in Epoxy Joints<\/h3>\n

Thermal fatigue in adhesive joints manifests through three overlapping mechanisms that progress at rates depending on stress amplitude and material properties.<\/p>\n

Microcrack initiation begins at stress concentration sites \u2014 the overlap ends, voids in the bondline, surface defects at the adhesive-substrate interface, and filler-matrix interfaces within the adhesive, the same locations where peak stress concentrates under peel, shear, and tensile loading<\/a>. The cyclic stress at these sites exceeds the local fatigue endurance limit of the adhesive material, and tiny cracks develop within the adhesive or at its interface with the substrate. At this stage, the joint retains most of its static strength because the damage is confined to small regions and has not connected into a propagating crack system.<\/p>\n

Crack coalescence and propagation occur as the microcracks grow and merge under continued thermal cycling. Once a connected crack path develops along the bond line \u2014 particularly at the overlap edges where stress is highest \u2014 each subsequent thermal cycle advances the crack front further into the bonded area, progressively reducing effective bond area and joint load capacity.<\/p>\n

Interface degradation from cyclic moisture uptake accompanies the mechanical damage. Moisture diffuses into the adhesive from the environment and concentrates at the interface, where it reduces the adhesive-to-substrate bond energy, and thermal cycling accelerates this transport by driving cyclical diffusion with temperature changes. The combination of cyclic stress and moisture at the interface is more damaging than either alone.<\/p>\n

If you need thermal cycling test data for a specific temperature range and cycle profile \u2014 automotive underhood, refrigeration equipment, outdoor structure \u2014 Email Us<\/a> and Incure can provide thermal fatigue characterization data or design guidance.<\/p>\n

Factors That Improve Thermal Cycling Durability<\/h3>\n

The most effective lever for improving thermal cycling durability is reducing the modulus of the adhesive \u2014 its stiffness in the cured state. A stiffer adhesive transmits CTE mismatch stress directly to the substrate interface as high-amplitude cyclic stress, while a lower-modulus adhesive with the same mismatch stores some of the differential expansion as elastic strain within the adhesive bulk rather than concentrating it entirely at the interface and overlap ends, reducing peak cyclic stress and the rate of fatigue damage accumulation.<\/p>\n

The tradeoff is clear: lower modulus typically means lower static strength. The highest-strength formulations tend to be highly cross-linked, high-modulus materials that resist deformation under load \u2014 which produces high lap shear values in short-term testing \u2014 but these same properties make them more susceptible to thermal fatigue than slightly lower-modulus, toughened formulations.<\/p>\n

Toughened epoxy formulations \u2014 those with rubber or thermoplastic toughening agents incorporated into the cross-linked network \u2014 improve thermal cycling durability without proportional reduction in static strength by providing energy absorption at crack tips, slowing crack growth rate. The improvement in fatigue life can be substantial \u2014 sometimes a factor of five to ten in cycle life at the same temperature range \u2014 compared to un-toughened high-modulus equivalents.<\/p>\n

Post-cure temperature also affects thermal cycling durability. A post-cure that develops a higher glass transition temperature produces a stiffer, more crosslinked network that is more prone to thermal fatigue at temperatures well below Tg. Matching post-cure condition to service temperature range \u2014 developing a Tg approximately 30 to 50\u00b0C above maximum service temperature rather than 100\u00b0C above it \u2014 can produce a more fatigue-durable joint.<\/p>\n

Surface Preparation and Primer Effects on Thermal Cycling Life<\/h3>\n

The adhesive-substrate interface quality has a dominant effect on thermal cycling durability because thermal fatigue failure typically initiates at the interface and progresses along it \u2014 the same surface-profile dependency detailed in how surface roughness affects bond strength in ultra-high bond epoxy joints<\/a>. An interface produced by grit blasting and bonding without primer on steel may survive 200 to 500 thermal cycles at a \u00b160\u00b0C range before measurable strength loss begins, while the same substrate with proper phosphate conversion coating or primer treatment may survive several thousand cycles under the same conditions.<\/p>\n

Primers formulated for thermal cycling environments \u2014 particularly those with corrosion-inhibiting pigments that passivate the substrate at the interface \u2014 reduce the combined effect of cyclic stress and moisture on interface degradation, providing both a chemical bonding layer and a barrier that slows moisture ingress at the bondline edges.<\/p>\n

Testing Thermal Cycling Performance<\/h3>\n

Thermal cycling tests for adhesive joints follow the cycle profile relevant to the application \u2014 temperature range, ramp rate, hold times, and number of cycles. After a defined number of cycles, coupons are tested for residual static strength and compared to uncycled controls to determine strength retention. A practical test exposes specimens to 100 to 1,000 cycles, depending on the application’s expected cycle count, and a joint retaining 80 percent or more of initial strength meets a typical acceptance criterion for structural applications.<\/p>\n

For applications with defined service lives and specific cycle counts, the test should be designed to represent a multiple of the service life to confirm the design safety factor is maintained throughout the expected service period, following the same reduction-factor logic used in ultra-high bond epoxy for load-bearing assemblies \u2014 safety factor calculation<\/a>.<\/p>\n

Contact Our Team<\/a> to discuss thermal cycling qualification testing, toughened formulation selection, and design for long-term joint durability in temperature-cycling environments.<\/p>\n

Visit www.incurelab.com<\/a> for more information.<\/p>\n","protected":false},"excerpt":{"rendered":"

A joint that passes static strength testing at room temperature has demonstrated one data point in its performance story. In service, that joint will experience dozens, hundreds, or thousands of thermal cycles from its minimum exposure temperature to its maximum, and each cycle imposes stress at the bondline through differential thermal expansion between adhesive and […]<\/p>\n","protected":false},"author":8,"featured_media":0,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"ocean_post_layout":"","ocean_both_sidebars_style":"","ocean_both_sidebars_content_width":0,"ocean_both_sidebars_sidebars_width":0,"ocean_sidebar":"","ocean_second_sidebar":"","ocean_disable_margins":"enable","ocean_add_body_class":"","ocean_shortcode_before_top_bar":"","ocean_shortcode_after_top_bar":"","ocean_shortcode_before_header":"","ocean_shortcode_after_header":"","ocean_has_shortcode":"","ocean_shortcode_after_title":"","ocean_shortcode_before_footer_widgets":"","ocean_shortcode_after_footer_widgets":"","ocean_shortcode_before_footer_bottom":"","ocean_shortcode_after_footer_bottom":"","ocean_display_top_bar":"default","ocean_display_header":"default","ocean_header_style":"","ocean_center_header_left_menu":"","ocean_custom_header_template":"","ocean_custom_logo":0,"ocean_custom_retina_logo":0,"ocean_custom_logo_max_width":0,"ocean_custom_logo_tablet_max_width":0,"ocean_custom_logo_mobile_max_width":0,"ocean_custom_logo_max_height":0,"ocean_custom_logo_tablet_max_height":0,"ocean_custom_logo_mobile_max_height":0,"ocean_header_custom_menu":"","ocean_menu_typo_font_family":"","ocean_menu_typo_font_subset":"","ocean_menu_typo_font_size":0,"ocean_menu_typo_font_size_tablet":0,"ocean_menu_typo_font_size_mobile":0,"ocean_menu_typo_font_size_unit":"px","ocean_menu_typo_font_weight":"","ocean_menu_typo_font_weight_tablet":"","ocean_menu_typo_font_weight_mobile":"","ocean_menu_typo_transform":"","ocean_menu_typo_transform_tablet":"","ocean_menu_typo_transform_mobile":"","ocean_menu_typo_line_height":0,"ocean_menu_typo_line_height_tablet":0,"ocean_menu_typo_line_height_mobile":0,"ocean_menu_typo_line_height_unit":"","ocean_menu_typo_spacing":0,"ocean_menu_typo_spacing_tablet":0,"ocean_menu_typo_spacing_mobile":0,"ocean_menu_typo_spacing_unit":"","ocean_menu_link_color":"","ocean_menu_link_color_hover":"","ocean_menu_link_color_active":"","ocean_menu_link_background":"","ocean_menu_link_hover_background":"","ocean_menu_link_active_background":"","ocean_menu_social_links_bg":"","ocean_menu_social_hover_links_bg":"","ocean_menu_social_links_color":"","ocean_menu_social_hover_links_color":"","ocean_disable_title":"default","ocean_disable_heading":"default","ocean_post_title":"","ocean_post_subheading":"","ocean_post_title_style":"","ocean_post_title_background_color":"","ocean_post_title_background":0,"ocean_post_title_bg_image_position":"","ocean_post_title_bg_image_attachment":"","ocean_post_title_bg_image_repeat":"","ocean_post_title_bg_image_size":"","ocean_post_title_height":0,"ocean_post_title_bg_overlay":0.5,"ocean_post_title_bg_overlay_color":"","ocean_disable_breadcrumbs":"default","ocean_breadcrumbs_color":"","ocean_breadcrumbs_separator_color":"","ocean_breadcrumbs_links_color":"","ocean_breadcrumbs_links_hover_color":"","ocean_display_footer_widgets":"default","ocean_display_footer_bottom":"default","ocean_custom_footer_template":"","ocean_post_oembed":"","ocean_post_self_hosted_media":"","ocean_post_video_embed":"","ocean_link_format":"","ocean_link_format_target":"self","ocean_quote_format":"","ocean_quote_format_link":"post","ocean_gallery_link_images":"on","ocean_gallery_id":[],"footnotes":""},"categories":[1],"tags":[],"class_list":["post-16117","post","type-post","status-publish","format-standard","hentry","category-uncategorized","entry"],"yoast_head":"\nHow Temperature Cycling Affects Ultra-High-Bond Epoxy Strength - INCURE INC.<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/incurelab.com\/wp\/how-temperature-cycling-affects-long-term-strength-of-ultra-high-bond-epoxy-joints\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"How Temperature Cycling Affects Ultra-High-Bond Epoxy Strength - INCURE INC.\" \/>\n<meta property=\"og:description\" content=\"A joint that passes static strength testing at room temperature has demonstrated one data point in its performance story. In service, that joint will experience dozens, hundreds, or thousands of thermal cycles from its minimum exposure temperature to its maximum, and each cycle imposes stress at the bondline through differential thermal expansion between adhesive and […]\" \/>\n<meta property=\"og:url\" content=\"https:\/\/incurelab.com\/wp\/how-temperature-cycling-affects-long-term-strength-of-ultra-high-bond-epoxy-joints\" \/>\n<meta property=\"og:site_name\" content=\"INCURE INC.\" \/>\n<meta property=\"article:published_time\" content=\"2026-05-21T10:45:27+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2026-07-13T11:25:38+00:00\" \/>\n<meta name=\"author\" content=\"Tech\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"Tech\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"6 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/how-temperature-cycling-affects-long-term-strength-of-ultra-high-bond-epoxy-joints#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/how-temperature-cycling-affects-long-term-strength-of-ultra-high-bond-epoxy-joints\"},\"author\":{\"name\":\"Tech\",\"@id\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/#\\\/schema\\\/person\\\/1b7ce4c8fbcc74f8ea53bece903c16e0\"},\"headline\":\"How Temperature Cycling Affects Ultra-High-Bond Epoxy Strength\",\"datePublished\":\"2026-05-21T10:45:27+00:00\",\"dateModified\":\"2026-07-13T11:25:38+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/how-temperature-cycling-affects-long-term-strength-of-ultra-high-bond-epoxy-joints\"},\"wordCount\":1151,\"publisher\":{\"@id\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/#organization\"},\"inLanguage\":\"en-US\"},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/how-temperature-cycling-affects-long-term-strength-of-ultra-high-bond-epoxy-joints\",\"url\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/how-temperature-cycling-affects-long-term-strength-of-ultra-high-bond-epoxy-joints\",\"name\":\"How Temperature Cycling Affects Ultra-High-Bond Epoxy Strength - INCURE INC.\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/#website\"},\"datePublished\":\"2026-05-21T10:45:27+00:00\",\"dateModified\":\"2026-07-13T11:25:38+00:00\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/how-temperature-cycling-affects-long-term-strength-of-ultra-high-bond-epoxy-joints#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/incurelab.com\\\/wp\\\/how-temperature-cycling-affects-long-term-strength-of-ultra-high-bond-epoxy-joints\"]}]},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/how-temperature-cycling-affects-long-term-strength-of-ultra-high-bond-epoxy-joints#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"How Temperature Cycling Affects Ultra-High-Bond Epoxy Strength\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/#website\",\"url\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/\",\"name\":\"INCURE INC.\",\"description\":\"Engineered Solutions. Trusted Worldwide\",\"publisher\":{\"@id\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/#organization\",\"name\":\"INCURE INC.\",\"url\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/wp-content\\\/uploads\\\/2025\\\/07\\\/incure-logo.jpeg\",\"contentUrl\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/wp-content\\\/uploads\\\/2025\\\/07\\\/incure-logo.jpeg\",\"width\":164,\"height\":45,\"caption\":\"INCURE INC.\"},\"image\":{\"@id\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/#\\\/schema\\\/logo\\\/image\\\/\"}},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/#\\\/schema\\\/person\\\/1b7ce4c8fbcc74f8ea53bece903c16e0\",\"name\":\"Tech\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/c3ce256a26542500e368f9667cd42dce19b2efa6aa7b8bcc76d0efef5b18bfcb?s=96&d=mm&r=g\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/c3ce256a26542500e368f9667cd42dce19b2efa6aa7b8bcc76d0efef5b18bfcb?s=96&d=mm&r=g\",\"contentUrl\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/c3ce256a26542500e368f9667cd42dce19b2efa6aa7b8bcc76d0efef5b18bfcb?s=96&d=mm&r=g\",\"caption\":\"Tech\"},\"url\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/author\\\/tech\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"How Temperature Cycling Affects Ultra-High-Bond Epoxy Strength - INCURE INC.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/incurelab.com\/wp\/how-temperature-cycling-affects-long-term-strength-of-ultra-high-bond-epoxy-joints","og_locale":"en_US","og_type":"article","og_title":"How Temperature Cycling Affects Ultra-High-Bond Epoxy Strength - INCURE INC.","og_description":"A joint that passes static strength testing at room temperature has demonstrated one data point in its performance story. In service, that joint will experience dozens, hundreds, or thousands of thermal cycles from its minimum exposure temperature to its maximum, and each cycle imposes stress at the bondline through differential thermal expansion between adhesive and […]","og_url":"https:\/\/incurelab.com\/wp\/how-temperature-cycling-affects-long-term-strength-of-ultra-high-bond-epoxy-joints","og_site_name":"INCURE INC.","article_published_time":"2026-05-21T10:45:27+00:00","article_modified_time":"2026-07-13T11:25:38+00:00","author":"Tech","twitter_card":"summary_large_image","twitter_misc":{"Written by":"Tech","Est. reading time":"6 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/incurelab.com\/wp\/how-temperature-cycling-affects-long-term-strength-of-ultra-high-bond-epoxy-joints#article","isPartOf":{"@id":"https:\/\/incurelab.com\/wp\/how-temperature-cycling-affects-long-term-strength-of-ultra-high-bond-epoxy-joints"},"author":{"name":"Tech","@id":"https:\/\/incurelab.com\/wp\/#\/schema\/person\/1b7ce4c8fbcc74f8ea53bece903c16e0"},"headline":"How Temperature Cycling Affects Ultra-High-Bond Epoxy Strength","datePublished":"2026-05-21T10:45:27+00:00","dateModified":"2026-07-13T11:25:38+00:00","mainEntityOfPage":{"@id":"https:\/\/incurelab.com\/wp\/how-temperature-cycling-affects-long-term-strength-of-ultra-high-bond-epoxy-joints"},"wordCount":1151,"publisher":{"@id":"https:\/\/incurelab.com\/wp\/#organization"},"inLanguage":"en-US"},{"@type":"WebPage","@id":"https:\/\/incurelab.com\/wp\/how-temperature-cycling-affects-long-term-strength-of-ultra-high-bond-epoxy-joints","url":"https:\/\/incurelab.com\/wp\/how-temperature-cycling-affects-long-term-strength-of-ultra-high-bond-epoxy-joints","name":"How Temperature Cycling Affects Ultra-High-Bond Epoxy Strength - INCURE INC.","isPartOf":{"@id":"https:\/\/incurelab.com\/wp\/#website"},"datePublished":"2026-05-21T10:45:27+00:00","dateModified":"2026-07-13T11:25:38+00:00","breadcrumb":{"@id":"https:\/\/incurelab.com\/wp\/how-temperature-cycling-affects-long-term-strength-of-ultra-high-bond-epoxy-joints#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/incurelab.com\/wp\/how-temperature-cycling-affects-long-term-strength-of-ultra-high-bond-epoxy-joints"]}]},{"@type":"BreadcrumbList","@id":"https:\/\/incurelab.com\/wp\/how-temperature-cycling-affects-long-term-strength-of-ultra-high-bond-epoxy-joints#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/incurelab.com\/wp\/"},{"@type":"ListItem","position":2,"name":"How Temperature Cycling Affects Ultra-High-Bond Epoxy Strength"}]},{"@type":"WebSite","@id":"https:\/\/incurelab.com\/wp\/#website","url":"https:\/\/incurelab.com\/wp\/","name":"INCURE INC.","description":"Engineered Solutions. Trusted Worldwide","publisher":{"@id":"https:\/\/incurelab.com\/wp\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/incurelab.com\/wp\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/incurelab.com\/wp\/#organization","name":"INCURE INC.","url":"https:\/\/incurelab.com\/wp\/","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/incurelab.com\/wp\/#\/schema\/logo\/image\/","url":"https:\/\/incurelab.com\/wp\/wp-content\/uploads\/2025\/07\/incure-logo.jpeg","contentUrl":"https:\/\/incurelab.com\/wp\/wp-content\/uploads\/2025\/07\/incure-logo.jpeg","width":164,"height":45,"caption":"INCURE INC."},"image":{"@id":"https:\/\/incurelab.com\/wp\/#\/schema\/logo\/image\/"}},{"@type":"Person","@id":"https:\/\/incurelab.com\/wp\/#\/schema\/person\/1b7ce4c8fbcc74f8ea53bece903c16e0","name":"Tech","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/secure.gravatar.com\/avatar\/c3ce256a26542500e368f9667cd42dce19b2efa6aa7b8bcc76d0efef5b18bfcb?s=96&d=mm&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/c3ce256a26542500e368f9667cd42dce19b2efa6aa7b8bcc76d0efef5b18bfcb?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/c3ce256a26542500e368f9667cd42dce19b2efa6aa7b8bcc76d0efef5b18bfcb?s=96&d=mm&r=g","caption":"Tech"},"url":"https:\/\/incurelab.com\/wp\/author\/tech"}]}},"rttpg_featured_image_url":null,"rttpg_author":{"display_name":"Tech","author_link":"https:\/\/incurelab.com\/wp\/author\/tech"},"rttpg_comment":0,"rttpg_category":"<a href=\"https:\/\/incurelab.com\/wp\/category\/uncategorized\" rel=\"category tag\">Uncategorized<\/a>","rttpg_excerpt":"A joint that passes static strength testing at room temperature has demonstrated one data point in its performance story. In service, that joint will experience dozens, hundreds, or thousands of thermal cycles from its minimum exposure temperature to its maximum, and each cycle imposes stress at the bondline through differential thermal expansion between adhesive and…","_links":{"self":[{"href":"https:\/\/incurelab.com\/wp\/wp-json\/wp\/v2\/posts\/16117","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/incurelab.com\/wp\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/incurelab.com\/wp\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/incurelab.com\/wp\/wp-json\/wp\/v2\/users\/8"}],"replies":[{"embeddable":true,"href":"https:\/\/incurelab.com\/wp\/wp-json\/wp\/v2\/comments?post=16117"}],"version-history":[{"count":2,"href":"https:\/\/incurelab.com\/wp\/wp-json\/wp\/v2\/posts\/16117\/revisions"}],"predecessor-version":[{"id":18282,"href":"https:\/\/incurelab.com\/wp\/wp-json\/wp\/v2\/posts\/16117\/revisions\/18282"}],"wp:attachment":[{"href":"https:\/\/incurelab.com\/wp\/wp-json\/wp\/v2\/media?parent=16117"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/incurelab.com\/wp\/wp-json\/wp\/v2\/categories?post=16117"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/incurelab.com\/wp\/wp-json\/wp\/v2\/tags?post=16117"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}