{"id":24574,"date":"2026-09-22T04:49:50","date_gmt":"2026-09-22T04:49:50","guid":{"rendered":"https:\/\/incurelab.com\/wp\/metal-putty-pot-life-working-time-and-full-cure-are-three-different-clocks"},"modified":"2026-09-22T04:49:50","modified_gmt":"2026-09-22T04:49:50","slug":"metal-putty-pot-life-working-time-and-full-cure-are-three-different-clocks","status":"publish","type":"post","link":"https:\/\/incurelab.com\/wp\/metal-putty-pot-life-working-time-and-full-cure-are-three-different-clocks","title":{"rendered":"Metal Putty \u2014 Pot Life, Working Time, and Full Cure Are Three Different Clocks"},"content":{"rendered":"

The most common metal putty failure is not the wrong product. It is a repair that was shaped after the putty had already begun to set, machined before it had finished curing, or returned to service while it was still gaining strength. Each of those is a clock error, and a metal putty has three clocks.<\/p>\n

Q: How long does metal putty take to cure?<\/h3>\n

A:<\/strong> It depends which “cure” you mean. Pot life<\/strong> (or working time) is how long after mixing the putty stays shapeable \u2014 often 5\u201320 minutes for fast two-part epoxies, longer for single-component ceramic compounds. Handling or machining time<\/strong> is when the repair is hard enough to drill, tap, or file \u2014 Incure’s Epo-Weld\u2122 HSS-601 reaches it in 2\u20134 hours at room temperature. Full cure<\/strong> is when the repair reaches its rated strength and chemical resistance \u2014 24\u201348 hours at room temperature for HSS-604 and HSS-610, or 2 hours with a 200\u00b0F post-cure. Loading the repair before full cure is the failure that looks like a bad product.<\/p>\n

Clock 1: Pot Life Starts at Mixing, Not at Application<\/h3>\n

For a two-part metal putty, the reaction begins the moment resin and hardener meet. Kneading generates heat, and heat shortens pot life \u2014 a large mass mixed in one lump can begin to stiffen before it reaches the part. Mix only what one application consumes, work at the cooler end of the product’s recommended temperature range if the shop is hot, and apply immediately. A putty that has started to crumble or roll rather than smear has passed its pot life; it will stick to itself but not to the metal.<\/p>\n

Single-component ceramic compounds such as Incure’s Epo-Weld\u2122 HTCP-550 and HTCP-950 are water-based and air-curing, so their working time is governed by evaporation rather than a chemical clock \u2014 longer and more forgiving, but they still skin over, and a skinned surface will not bond a second layer.<\/p>\n

Clock 2: Machining Time Depends on Filler and Temperature<\/h3>\n

Metal putties are filled epoxies, and the filler decides what the cured repair can do. Incure’s HSS-604 is aluminum- and ceramic-filled specifically so the cured repair machines, drills, and taps like metal \u2014 at Shore D84\u2013D94 and 14,500 PSI flexural strength \u2014 while the glass-fiber- and kevlar-reinforced HSS-601 (13,500 PSI flexural) is built to resist crack propagation and abrasion on chutes, hoppers, and pump casings rather than to be machined to a dimension. Machining before the putty reaches handling strength tears filler out of the matrix and leaves a porous surface; machining a fully cured HSS-604 produces a metal-like finish. The grade-by-grade breakdown is in Incure’s High Strength Structural Epoxy guide<\/a>.<\/p>\n

Temperature moves this clock more than any other variable. Epoxy cure rate roughly doubles for every 10\u00b0C rise, so a repair that machines in 4 hours at 25\u00b0C may need 8 at 15\u00b0C. A post-cure at the product’s rated temperature \u2014 175\u00b0F for HSS-601, 200\u00b0F for HSS-604\/610 \u2014 collapses a two-day room-temperature schedule into hours.<\/p>\n

Email Us<\/a> with the component, the damage, the shop temperature, and how soon the part must return to service, and Incure’s engineers can select a putty whose three clocks fit the maintenance window.<\/p>\n

Clock 3: Full Cure Is When the Spec Sheet Applies<\/h3>\n

Flexural strength, tensile shear, chemical resistance, and temperature rating are all measured on fully cured material. A repair returned to service at handling strength is carrying load with a partially cross-linked matrix and will creep, crack, or absorb chemicals it would have resisted a day later. For chemical service this matters most: HSS-610, the chemically resistant grade of the line at 16,500 PSI flexural, earns its resistance to acids, alkalis, and solvents only after full cure. For high-temperature service, the putties in Incure’s High Temperature Glass Coatings guide<\/a> \u2014 HTCP-550 rated to 2000\u00b0F for cast-iron and stainless manifolds, HTCP-650 to 2350\u00b0F as a conformable gasket seal, HTCP-750 as a machinable aluminum-filled putty to 1400\u00b0F, HTCP-950 as the non-sagging vertical\/overhead formulation to 2000\u00b0F \u2014 reach their ceilings through their full air-cure and first heat-up, not at the moment they feel hard.<\/p>\n

The Surface Clock Nobody Lists<\/h3>\n

Surface preparation has a clock of its own: freshly abraded steel begins to flash-rust within an hour in a humid shop, and freshly abraded aluminum re-oxidizes in minutes. Abrade, solvent-wipe, and apply the putty in the same session. Incure’s broader metal putty selection guide<\/a> covers matching the putty to the metal; the point here is that the best-matched putty still fails on an oxidized surface.<\/p>\n

Putting the Clocks Together<\/h3>\n

For a same-shift return to service on an abrasion-damaged casing: HSS-601, mixed in small batches, applied within its pot life, post-cured at 175\u00b0F, and loaded after full cure. For a worn bore that must be machined back to dimension: HSS-604, given its full 24\u201348 hours (or the 200\u00b0F post-cure) before the first cut. For an exhaust manifold crack: HTCP-550, air-cured fully, then brought to temperature gradually on first start-up. Same category of product, three different schedules \u2014 and each one fails if run on the wrong clock.<\/p>\n

Contact Our Team<\/a> to match an Epo-Weld\u2122 repair putty and its cure schedule to your maintenance window.<\/p>\n

Visit www.incurelab.com<\/a> for more information.<\/p>\n","protected":false},"excerpt":{"rendered":"

The most common metal putty failure is not the wrong product. It is a repair that was shaped after the putty had already begun to set, machined before it had finished curing, or returned to service while it was still gaining strength. Each of those is a clock error, and a metal putty has three […]<\/p>\n","protected":false},"author":11,"featured_media":0,"comment_status":"","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"ocean_front_end_style_editor":"no","ocean_post_layout":"","ocean_both_sidebars_style":"","ocean_both_sidebars_content_width":0,"ocean_both_sidebars_sidebars_width":0,"ocean_sidebar":"","ocean_second_sidebar":"","ocean_disable_margins":"enable","ocean_add_body_class":"","ocean_shortcode_before_top_bar":"","ocean_shortcode_after_top_bar":"","ocean_shortcode_before_header":"","ocean_shortcode_after_header":"","ocean_has_shortcode":"","ocean_shortcode_after_title":"","ocean_shortcode_before_footer_widgets":"","ocean_shortcode_after_footer_widgets":"","ocean_shortcode_before_footer_bottom":"","ocean_shortcode_after_footer_bottom":"","ocean_display_top_bar":"default","ocean_display_header":"default","ocean_header_style":"","ocean_center_header_left_menu":"","ocean_custom_header_template":"","ocean_custom_logo":0,"ocean_custom_retina_logo":0,"ocean_custom_logo_max_width":0,"ocean_custom_logo_tablet_max_width":0,"ocean_custom_logo_mobile_max_width":0,"ocean_custom_logo_max_height":0,"ocean_custom_logo_tablet_max_height":0,"ocean_custom_logo_mobile_max_height":0,"ocean_header_custom_menu":"","ocean_menu_typo_font_family":"","ocean_menu_typo_font_subset":"","ocean_menu_typo_font_size":0,"ocean_menu_typo_font_size_tablet":0,"ocean_menu_typo_font_size_mobile":0,"ocean_menu_typo_font_size_unit":"px","ocean_menu_typo_font_weight":"","ocean_menu_typo_font_weight_tablet":"","ocean_menu_typo_font_weight_mobile":"","ocean_menu_typo_transform":"","ocean_menu_typo_transform_tablet":"","ocean_menu_typo_transform_mobile":"","ocean_menu_typo_line_height":0,"ocean_menu_typo_line_height_tablet":0,"ocean_menu_typo_line_height_mobile":0,"ocean_menu_typo_line_height_unit":"","ocean_menu_typo_spacing":0,"ocean_menu_typo_spacing_tablet":0,"ocean_menu_typo_spacing_mobile":0,"ocean_menu_typo_spacing_unit":"","ocean_menu_link_color":"","ocean_menu_link_color_hover":"","ocean_menu_link_color_active":"","ocean_menu_link_background":"","ocean_menu_link_hover_background":"","ocean_menu_link_active_background":"","ocean_menu_social_links_bg":"","ocean_menu_social_hover_links_bg":"","ocean_menu_social_links_color":"","ocean_menu_social_hover_links_color":"","ocean_disable_title":"default","ocean_disable_heading":"default","ocean_post_title":"","ocean_post_subheading":"","ocean_post_title_style":"","ocean_post_title_background_color":"","ocean_post_title_background":0,"ocean_post_title_bg_image_position":"","ocean_post_title_bg_image_attachment":"","ocean_post_title_bg_image_repeat":"","ocean_post_title_bg_image_size":"","ocean_post_title_height":0,"ocean_post_title_bg_overlay":0.5,"ocean_post_title_bg_overlay_color":"","ocean_disable_breadcrumbs":"default","ocean_breadcrumbs_color":"","ocean_breadcrumbs_separator_color":"","ocean_breadcrumbs_links_color":"","ocean_breadcrumbs_links_hover_color":"","ocean_display_footer_widgets":"default","ocean_display_footer_bottom":"default","ocean_custom_footer_template":"","ocean_post_oembed":"","ocean_post_self_hosted_media":"","ocean_post_video_embed":"","ocean_link_format":"","ocean_link_format_target":"self","ocean_quote_format":"","ocean_quote_format_link":"post","ocean_gallery_link_images":"on","ocean_gallery_id":[],"footnotes":""},"categories":[1],"tags":[],"class_list":["post-24574","post","type-post","status-publish","format-standard","hentry","category-uncategorized","entry"],"yoast_head":"\nMetal Putty \u2014 Pot Life, Working Time, and Full Cure Are Three Different Clocks - INCURE INC.<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/incurelab.com\/wp\/metal-putty-pot-life-working-time-and-full-cure-are-three-different-clocks\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Metal Putty \u2014 Pot Life, Working Time, and Full Cure Are Three Different Clocks - INCURE INC.\" \/>\n<meta property=\"og:description\" content=\"The most common metal putty failure is not the wrong product. It is a repair that was shaped after the putty had already begun to set, machined before it had finished curing, or returned to service while it was still gaining strength. Each of those is a clock error, and a metal putty has three […]\" \/>\n<meta property=\"og:url\" content=\"https:\/\/incurelab.com\/wp\/metal-putty-pot-life-working-time-and-full-cure-are-three-different-clocks\" \/>\n<meta property=\"og:site_name\" content=\"INCURE INC.\" \/>\n<meta property=\"article:published_time\" content=\"2026-09-22T04:49:50+00:00\" \/>\n<meta name=\"author\" content=\"blog-automation\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"blog-automation\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"4 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/metal-putty-pot-life-working-time-and-full-cure-are-three-different-clocks#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/metal-putty-pot-life-working-time-and-full-cure-are-three-different-clocks\"},\"author\":{\"name\":\"blog-automation\",\"@id\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/#\\\/schema\\\/person\\\/ec606123b0b214a56be918f2295f05ad\"},\"headline\":\"Metal Putty \u2014 Pot Life, Working Time, and Full Cure Are Three Different Clocks\",\"datePublished\":\"2026-09-22T04:49:50+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/metal-putty-pot-life-working-time-and-full-cure-are-three-different-clocks\"},\"wordCount\":862,\"publisher\":{\"@id\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/#organization\"},\"inLanguage\":\"en-US\"},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/metal-putty-pot-life-working-time-and-full-cure-are-three-different-clocks\",\"url\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/metal-putty-pot-life-working-time-and-full-cure-are-three-different-clocks\",\"name\":\"Metal Putty \u2014 Pot Life, Working Time, and Full Cure Are Three Different Clocks - INCURE INC.\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/#website\"},\"datePublished\":\"2026-09-22T04:49:50+00:00\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/metal-putty-pot-life-working-time-and-full-cure-are-three-different-clocks#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/incurelab.com\\\/wp\\\/metal-putty-pot-life-working-time-and-full-cure-are-three-different-clocks\"]}]},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/metal-putty-pot-life-working-time-and-full-cure-are-three-different-clocks#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Metal Putty \u2014 Pot Life, Working Time, and Full Cure Are Three Different Clocks\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/#website\",\"url\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/\",\"name\":\"INCURE INC.\",\"description\":\"Engineered Solutions. Trusted Worldwide\",\"publisher\":{\"@id\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/#organization\",\"name\":\"INCURE INC.\",\"url\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/wp-content\\\/uploads\\\/2025\\\/07\\\/incure-logo.jpeg\",\"contentUrl\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/wp-content\\\/uploads\\\/2025\\\/07\\\/incure-logo.jpeg\",\"width\":164,\"height\":45,\"caption\":\"INCURE INC.\"},\"image\":{\"@id\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/#\\\/schema\\\/logo\\\/image\\\/\"}},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/#\\\/schema\\\/person\\\/ec606123b0b214a56be918f2295f05ad\",\"name\":\"blog-automation\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/046236dd05fad02cad1145b97aeeed427ad47420383caa3dd190560a7106280c?s=96&d=mm&r=g\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/046236dd05fad02cad1145b97aeeed427ad47420383caa3dd190560a7106280c?s=96&d=mm&r=g\",\"contentUrl\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/046236dd05fad02cad1145b97aeeed427ad47420383caa3dd190560a7106280c?s=96&d=mm&r=g\",\"caption\":\"blog-automation\"},\"url\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/author\\\/blog-automation\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Metal Putty \u2014 Pot Life, Working Time, and Full Cure Are Three Different Clocks - INCURE INC.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/incurelab.com\/wp\/metal-putty-pot-life-working-time-and-full-cure-are-three-different-clocks","og_locale":"en_US","og_type":"article","og_title":"Metal Putty \u2014 Pot Life, Working Time, and Full Cure Are Three Different Clocks - INCURE INC.","og_description":"The most common metal putty failure is not the wrong product. It is a repair that was shaped after the putty had already begun to set, machined before it had finished curing, or returned to service while it was still gaining strength. Each of those is a clock error, and a metal putty has three […]","og_url":"https:\/\/incurelab.com\/wp\/metal-putty-pot-life-working-time-and-full-cure-are-three-different-clocks","og_site_name":"INCURE INC.","article_published_time":"2026-09-22T04:49:50+00:00","author":"blog-automation","twitter_card":"summary_large_image","twitter_misc":{"Written by":"blog-automation","Est. reading time":"4 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/incurelab.com\/wp\/metal-putty-pot-life-working-time-and-full-cure-are-three-different-clocks#article","isPartOf":{"@id":"https:\/\/incurelab.com\/wp\/metal-putty-pot-life-working-time-and-full-cure-are-three-different-clocks"},"author":{"name":"blog-automation","@id":"https:\/\/incurelab.com\/wp\/#\/schema\/person\/ec606123b0b214a56be918f2295f05ad"},"headline":"Metal Putty \u2014 Pot Life, Working Time, and Full Cure Are Three Different Clocks","datePublished":"2026-09-22T04:49:50+00:00","mainEntityOfPage":{"@id":"https:\/\/incurelab.com\/wp\/metal-putty-pot-life-working-time-and-full-cure-are-three-different-clocks"},"wordCount":862,"publisher":{"@id":"https:\/\/incurelab.com\/wp\/#organization"},"inLanguage":"en-US"},{"@type":"WebPage","@id":"https:\/\/incurelab.com\/wp\/metal-putty-pot-life-working-time-and-full-cure-are-three-different-clocks","url":"https:\/\/incurelab.com\/wp\/metal-putty-pot-life-working-time-and-full-cure-are-three-different-clocks","name":"Metal Putty \u2014 Pot Life, Working Time, and Full Cure Are Three Different Clocks - INCURE INC.","isPartOf":{"@id":"https:\/\/incurelab.com\/wp\/#website"},"datePublished":"2026-09-22T04:49:50+00:00","breadcrumb":{"@id":"https:\/\/incurelab.com\/wp\/metal-putty-pot-life-working-time-and-full-cure-are-three-different-clocks#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/incurelab.com\/wp\/metal-putty-pot-life-working-time-and-full-cure-are-three-different-clocks"]}]},{"@type":"BreadcrumbList","@id":"https:\/\/incurelab.com\/wp\/metal-putty-pot-life-working-time-and-full-cure-are-three-different-clocks#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/incurelab.com\/wp\/"},{"@type":"ListItem","position":2,"name":"Metal Putty \u2014 Pot Life, Working Time, and Full Cure Are Three Different Clocks"}]},{"@type":"WebSite","@id":"https:\/\/incurelab.com\/wp\/#website","url":"https:\/\/incurelab.com\/wp\/","name":"INCURE INC.","description":"Engineered Solutions. Trusted Worldwide","publisher":{"@id":"https:\/\/incurelab.com\/wp\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/incurelab.com\/wp\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/incurelab.com\/wp\/#organization","name":"INCURE INC.","url":"https:\/\/incurelab.com\/wp\/","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/incurelab.com\/wp\/#\/schema\/logo\/image\/","url":"https:\/\/incurelab.com\/wp\/wp-content\/uploads\/2025\/07\/incure-logo.jpeg","contentUrl":"https:\/\/incurelab.com\/wp\/wp-content\/uploads\/2025\/07\/incure-logo.jpeg","width":164,"height":45,"caption":"INCURE INC."},"image":{"@id":"https:\/\/incurelab.com\/wp\/#\/schema\/logo\/image\/"}},{"@type":"Person","@id":"https:\/\/incurelab.com\/wp\/#\/schema\/person\/ec606123b0b214a56be918f2295f05ad","name":"blog-automation","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/secure.gravatar.com\/avatar\/046236dd05fad02cad1145b97aeeed427ad47420383caa3dd190560a7106280c?s=96&d=mm&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/046236dd05fad02cad1145b97aeeed427ad47420383caa3dd190560a7106280c?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/046236dd05fad02cad1145b97aeeed427ad47420383caa3dd190560a7106280c?s=96&d=mm&r=g","caption":"blog-automation"},"url":"https:\/\/incurelab.com\/wp\/author\/blog-automation"}]}},"rttpg_featured_image_url":null,"rttpg_author":{"display_name":"blog-automation","author_link":"https:\/\/incurelab.com\/wp\/author\/blog-automation"},"rttpg_comment":0,"rttpg_category":"<a href=\"https:\/\/incurelab.com\/wp\/category\/uncategorized\" rel=\"category tag\">Uncategorized<\/a>","rttpg_excerpt":"The most common metal putty failure is not the wrong product. It is a repair that was shaped after the putty had already begun to set, machined before it had finished curing, or returned to service while it was still gaining strength. Each of those is a clock error, and a metal putty has three…","_links":{"self":[{"href":"https:\/\/incurelab.com\/wp\/wp-json\/wp\/v2\/posts\/24574","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/incurelab.com\/wp\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/incurelab.com\/wp\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/incurelab.com\/wp\/wp-json\/wp\/v2\/users\/11"}],"replies":[{"embeddable":true,"href":"https:\/\/incurelab.com\/wp\/wp-json\/wp\/v2\/comments?post=24574"}],"version-history":[{"count":0,"href":"https:\/\/incurelab.com\/wp\/wp-json\/wp\/v2\/posts\/24574\/revisions"}],"wp:attachment":[{"href":"https:\/\/incurelab.com\/wp\/wp-json\/wp\/v2\/media?parent=24574"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/incurelab.com\/wp\/wp-json\/wp\/v2\/categories?post=24574"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/incurelab.com\/wp\/wp-json\/wp\/v2\/tags?post=24574"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}