{"id":5819,"date":"2024-11-27T01:39:13","date_gmt":"2024-11-27T01:39:13","guid":{"rendered":"https:\/\/incurelab.com\/wp\/?p=5819"},"modified":"2026-08-29T12:33:40","modified_gmt":"2026-08-29T12:33:40","slug":"dome-coating-resin-vs-doming","status":"publish","type":"post","link":"https:\/\/incurelab.com\/wp\/dome-coating-resin-vs-doming","title":{"rendered":"Dome Coating Resin vs. Doming vs. Casting Resin: A Comparison"},"content":{"rendered":"<p>Three related processes get lumped together whenever a glossy, three-dimensional finish is involved: dome coating, doming, and casting. They use similar resin chemistry but differ in layer thickness, geometry, and purpose. Knowing which one your part needs keeps material cost and cycle time under control.<\/p>\n<h3>Dome Coating<\/h3>\n<p>Dome coating applies a thin, self-leveling resin layer over a flat printed surface such as a label, nameplate, or membrane switch overlay. Surface tension pulls the resin into a slight convex curve at the edges, giving a subtle raised look and a hard, clear protective shell.<\/p>\n<p>Key traits:<\/p>\n<ul>\n<li><strong>Layer thickness<\/strong> typically 0.3 to 0.8 mm.<\/li>\n<li><strong>Purpose<\/strong> is protection first: abrasion, chemical, and UV resistance for the graphic underneath.<\/li>\n<li><strong>Economy<\/strong> is good because material volume per part is low.<\/li>\n<li><strong>Substrate<\/strong> is almost always a 2D printed film or panel.<\/li>\n<\/ul>\n<h3>Doming<\/h3>\n<p>Doming applies a thicker resin bead that builds a pronounced, pillow-shaped 3D profile. It is used where the raised, magnified appearance is the point, such as branded emblems, trim badges, and premium product labels.<\/p>\n<p>Key traits:<\/p>\n<ul>\n<li><strong>Layer thickness<\/strong> typically 1 to 3 mm, sometimes more.<\/li>\n<li><strong>Purpose<\/strong> is appearance and tactile feel, with protection as a bonus.<\/li>\n<li><strong>Edge control<\/strong> matters; the resin must hold its profile without running off before it gels.<\/li>\n<li><strong>Material volume<\/strong> per part is several times that of dome coating.<\/li>\n<\/ul>\n<h3>Casting Resin<\/h3>\n<p>Casting resin is poured into a mold to form a solid three-dimensional object rather than a coating on a surface. Output ranges from decorative pieces to functional encapsulations and tooling components.<\/p>\n<p>Key traits:<\/p>\n<ul>\n<li><strong>Thickness<\/strong> is unlimited, from a few millimeters to bulk pours.<\/li>\n<li><strong>Purpose<\/strong> is to create a part, not finish one.<\/li>\n<li><strong>Exotherm management<\/strong> is critical in thick sections; heat build-up during cure can crack or discolor the casting.<\/li>\n<li><strong>Cure shrinkage<\/strong> must be low to hold mold detail and dimensions.<\/li>\n<\/ul>\n<p>Not sure which process your part calls for? <a href=\"mailto:support@incurelab.com\">Email Us<\/a> with a sketch and the finish you want.<\/p>\n<h3>Resin Chemistry Across the Three<\/h3>\n<p><strong>UV-curable resin<\/strong> cures in seconds under a lamp, which suits high-volume dome coating and doming lines where throughput matters. Cure only reaches as deep as the light penetrates, so very thick domes may need a longer or higher-dose exposure. A <a href=\"https:\/\/incurelab.com\/wp\/best-uv-lamp-for-resin-curing\">UV lamp sized for resin curing<\/a> is the enabling piece of equipment.<\/p>\n<p><strong>Two-part polyurethane<\/strong> gives fast set, good clarity, and toughness, popular for small-batch doming, but it is sensitive to humidity during cure.<\/p>\n<p><strong>Two-part epoxy<\/strong> offers the best clarity retention, hardness, and outdoor durability, and cures fully through any thickness regardless of light. It is the default for large domes, outdoor parts, and casting, at the cost of longer cure times.<\/p>\n<p>For clear bonds and coatings more broadly, this overview of <a href=\"https:\/\/incurelab.com\/wp\/uv-glue-vs-epoxy-which-is-better-for-transparent-bonding\">transparent bonding chemistry<\/a> and this look at <a href=\"https:\/\/incurelab.com\/wp\/best-uv-glue-for-glass\">UV glue for glass<\/a> both cover the clarity and yellowing trade-offs that apply here.<\/p>\n<h3>Process Control Points<\/h3>\n<ul>\n<li><strong>Surface preparation:<\/strong> clean and dry the substrate; contamination causes fisheyes and edge crawl.<\/li>\n<li><strong>Dispense accuracy:<\/strong> meter the resin by volume or weight, not by eye, especially for doming where profile depends on bead size.<\/li>\n<li><strong>Level work surface:<\/strong> self-leveling resin needs a flat, stable platform during gel.<\/li>\n<li><strong>Dust control:<\/strong> work under cover; airborne particles are locked into the cured surface permanently.<\/li>\n<li><strong>Cure verification:<\/strong> for UV resin, check delivered dose with a radiometer, since lamp output declines with use.<\/li>\n<\/ul>\n<h3>Durability Considerations<\/h3>\n<p>Outdoor parts need UV-stabilized resin to resist yellowing and chalking. Parts that see temperature swings can suffer edge lifting where the resin and substrate expand at different rates; the mechanism behind that is explained in this piece on <a href=\"https:\/\/incurelab.com\/wp\/how-cte-mismatch-causes-adhesive-bond-failure\">how CTE mismatch causes adhesive bond failure<\/a>. Choosing a slightly flexible resin and keeping edges feathered rather than abrupt both help.<\/p>\n<h3>Matching Volume to Method<\/h3>\n<p>Production volume influences the choice as much as appearance does. High-volume label lines favor UV dome coating and doming because each part clears the cure station in seconds and the resin has unlimited working time in the reservoir. Small batches and one-off decorative or functional castings favor two-part epoxy or polyurethane, since there is no lamp to buy and cure depth is not a constraint. Mid-volume work often runs UV for the coating steps and a batch oven or ambient cure for any thick castings in the same product family.<\/p>\n<h3>Frequently Asked Questions<\/h3>\n<p><strong>Q: Can I dome-coat over an inkjet-printed graphic?<\/strong><br \/>\nA: Yes, if the ink is fully dry and compatible with the resin. Test a sample first; some solvent-based inks bleed or lift when flooded with monomer.<\/p>\n<p><strong>Q: Why does my dome pull back from the edge of the label?<\/strong><br \/>\nA: The dispensed volume is too low, the substrate is not level, or the resin and substrate are expanding at different rates during cure and service. Increase volume, level the work surface, and consider a slightly flexible resin.<\/p>\n<p><strong>Q: Is casting resin the same as doming resin?<\/strong><br \/>\nA: They share chemistry families but differ in viscosity, exotherm control, and cure-depth capability. A doming resin poured thick can overheat and yellow; a casting resin spread thin may not level well.<\/p>\n<h3>Summary<\/h3>\n<p>Dome coating is thin protection over a graphic, doming is a thick decorative 3D profile, and casting builds a solid part in a mold. UV resin favors speed and volume, epoxy favors clarity retention and unlimited depth, and polyurethane sits between them. Match the process and chemistry to thickness, appearance, and service environment, then validate on sample parts.<\/p>\n<p>For help selecting a resin and process for your project, <a href=\"https:\/\/www.incurelab.com\/contact\">Contact Our Team<\/a>.<\/p>\n<p>Visit <a href=\"https:\/\/www.incurelab.com\">www.incurelab.com<\/a> for more information.<\/p>\n","protected":false},"excerpt":{"rendered":"<p>Three related processes get lumped together whenever a glossy, three-dimensional finish is involved: dome coating, doming, and casting. They use similar resin chemistry but differ in layer thickness, geometry, and purpose. Knowing which one your part needs keeps material cost and cycle time under control. Dome Coating Dome coating applies a thin, self-leveling resin layer [&hellip;]<\/p>\n","protected":false},"author":9,"featured_media":0,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"ocean_front_end_style_editor":"no","ocean_post_layout":"","ocean_both_sidebars_style":"","ocean_both_sidebars_content_width":0,"ocean_both_sidebars_sidebars_width":0,"ocean_sidebar":"","ocean_second_sidebar":"","ocean_disable_margins":"enable","ocean_add_body_class":"","ocean_shortcode_before_top_bar":"","ocean_shortcode_after_top_bar":"","ocean_shortcode_before_header":"","ocean_shortcode_after_header":"","ocean_has_shortcode":"","ocean_shortcode_after_title":"","ocean_shortcode_before_footer_widgets":"","ocean_shortcode_after_footer_widgets":"","ocean_shortcode_before_footer_bottom":"","ocean_shortcode_after_footer_bottom":"","ocean_display_top_bar":"default","ocean_display_header":"default","ocean_header_style":"","ocean_center_header_left_menu":"","ocean_custom_header_template":"","ocean_custom_logo":0,"ocean_custom_retina_logo":0,"ocean_custom_logo_max_width":0,"ocean_custom_logo_tablet_max_width":0,"ocean_custom_logo_mobile_max_width":0,"ocean_custom_logo_max_height":0,"ocean_custom_logo_tablet_max_height":0,"ocean_custom_logo_mobile_max_height":0,"ocean_header_custom_menu":"","ocean_menu_typo_font_family":"","ocean_menu_typo_font_subset":"","ocean_menu_typo_font_size":0,"ocean_menu_typo_font_size_tablet":0,"ocean_menu_typo_font_size_mobile":0,"ocean_menu_typo_font_size_unit":"px","ocean_menu_typo_font_weight":"","ocean_menu_typo_font_weight_tablet":"","ocean_menu_typo_font_weight_mobile":"","ocean_menu_typo_transform":"","ocean_menu_typo_transform_tablet":"","ocean_menu_typo_transform_mobile":"","ocean_menu_typo_line_height":0,"ocean_menu_typo_line_height_tablet":0,"ocean_menu_typo_line_height_mobile":0,"ocean_menu_typo_line_height_unit":"","ocean_menu_typo_spacing":0,"ocean_menu_typo_spacing_tablet":0,"ocean_menu_typo_spacing_mobile":0,"ocean_menu_typo_spacing_unit":"","ocean_menu_link_color":"","ocean_menu_link_color_hover":"","ocean_menu_link_color_active":"","ocean_menu_link_background":"","ocean_menu_link_hover_background":"","ocean_menu_link_active_background":"","ocean_menu_social_links_bg":"","ocean_menu_social_hover_links_bg":"","ocean_menu_social_links_color":"","ocean_menu_social_hover_links_color":"","ocean_disable_title":"default","ocean_disable_heading":"default","ocean_post_title":"","ocean_post_subheading":"","ocean_post_title_style":"","ocean_post_title_background_color":"","ocean_post_title_background":0,"ocean_post_title_bg_image_position":"","ocean_post_title_bg_image_attachment":"","ocean_post_title_bg_image_repeat":"","ocean_post_title_bg_image_size":"","ocean_post_title_height":0,"ocean_post_title_bg_overlay":0.5,"ocean_post_title_bg_overlay_color":"","ocean_disable_breadcrumbs":"default","ocean_breadcrumbs_color":"","ocean_breadcrumbs_separator_color":"","ocean_breadcrumbs_links_color":"","ocean_breadcrumbs_links_hover_color":"","ocean_display_footer_widgets":"default","ocean_display_footer_bottom":"default","ocean_custom_footer_template":"","ocean_post_oembed":"","ocean_post_self_hosted_media":"","ocean_post_video_embed":"","ocean_link_format":"","ocean_link_format_target":"self","ocean_quote_format":"","ocean_quote_format_link":"post","ocean_gallery_link_images":"on","ocean_gallery_id":[],"footnotes":""},"categories":[347,103],"tags":[2184,2190,2198,2199,2192,2179,2186,2197,2180,2187,2193,2183,2194,2182,2200,2195,2189,2196,2191,2176,2188,2181,2178,2177,2185,2175],"class_list":["post-5819","post","type-post","status-publish","format-standard","hentry","category-epoxy","category-uv-adhesives","tag-2d-resin","tag-3d-resin","tag-applications-of-resin","tag-benefits-of-resin-coating","tag-casting-resin","tag-craft-resin","tag-custom-resin-products","tag-decorative-coating","tag-diy-resin","tag-diy-resin-projects","tag-dome-coating-resin","tag-dome-coating-resin-vs-doming-resin","tag-doming-resin","tag-doming-resin-vs-casting-resin","tag-how-to-choose-the-right-resin-technique","tag-industrial-resin","tag-professional-resin-finishing","tag-protective-coating","tag-resin-application","tag-resin-coating","tag-resin-crafts","tag-resin-finishing","tag-resin-jewelry","tag-resin-materials","tag-resin-products","tag-resin-techniques","entry"],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v28.4 - https:\/\/yoast.com\/product\/yoast-seo-wordpress\/ -->\n<title>Dome Coating Resin vs. Doming vs. Casting Resin: A Comparison - INCURE INC.<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/incurelab.com\/wp\/dome-coating-resin-vs-doming\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Dome Coating Resin vs. Doming vs. Casting Resin: A Comparison - INCURE INC.\" \/>\n<meta property=\"og:description\" content=\"Three related processes get lumped together whenever a glossy, three-dimensional finish is involved: dome coating, doming, and casting. They use similar resin chemistry but differ in layer thickness, geometry, and purpose. Knowing which one your part needs keeps material cost and cycle time under control. Dome Coating Dome coating applies a thin, self-leveling resin layer [&hellip;]\" \/>\n<meta property=\"og:url\" content=\"https:\/\/incurelab.com\/wp\/dome-coating-resin-vs-doming\" \/>\n<meta property=\"og:site_name\" content=\"INCURE INC.\" \/>\n<meta property=\"article:published_time\" content=\"2024-11-27T01:39:13+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2026-08-29T12:33:40+00:00\" \/>\n<meta name=\"author\" content=\"Incure Content Team\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"Incure Content Team\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"5 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/dome-coating-resin-vs-doming#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/dome-coating-resin-vs-doming\"},\"author\":{\"name\":\"Incure Content Team\",\"@id\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/#\\\/schema\\\/person\\\/53482b163015e8f48dc86f4132515727\"},\"headline\":\"Dome Coating Resin vs. Doming vs. Casting Resin: A Comparison\",\"datePublished\":\"2024-11-27T01:39:13+00:00\",\"dateModified\":\"2026-08-29T12:33:40+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/dome-coating-resin-vs-doming\"},\"wordCount\":915,\"publisher\":{\"@id\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/#organization\"},\"keywords\":[\"2D resin\",\"3D resin\",\"applications of resin\",\"benefits of resin coating\",\"casting resin\",\"craft resin\",\"custom resin products\",\"decorative coating\",\"DIY resin\",\"DIY resin projects\",\"dome coating resin\",\"dome coating resin vs doming resin\",\"doming resin\",\"doming resin vs casting resin\",\"how to choose the right resin technique\",\"industrial resin\",\"professional resin finishing\",\"protective coating\",\"resin application\",\"resin coating\",\"resin crafts\",\"resin finishing\",\"resin jewelry\",\"resin materials\",\"resin products\",\"resin techniques\"],\"articleSection\":[\"Epoxy\",\"UV Adhesives\"],\"inLanguage\":\"en-US\"},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/dome-coating-resin-vs-doming\",\"url\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/dome-coating-resin-vs-doming\",\"name\":\"Dome Coating Resin vs. Doming vs. Casting Resin: A Comparison - INCURE INC.\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/#website\"},\"datePublished\":\"2024-11-27T01:39:13+00:00\",\"dateModified\":\"2026-08-29T12:33:40+00:00\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/dome-coating-resin-vs-doming#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/incurelab.com\\\/wp\\\/dome-coating-resin-vs-doming\"]}]},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/dome-coating-resin-vs-doming#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Dome Coating Resin vs. Doming vs. Casting Resin: A Comparison\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/#website\",\"url\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/\",\"name\":\"INCURE INC.\",\"description\":\"Engineered Solutions. Trusted Worldwide\",\"publisher\":{\"@id\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/#organization\",\"name\":\"INCURE INC.\",\"url\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/wp-content\\\/uploads\\\/2025\\\/07\\\/incure-logo.jpeg\",\"contentUrl\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/wp-content\\\/uploads\\\/2025\\\/07\\\/incure-logo.jpeg\",\"width\":164,\"height\":45,\"caption\":\"INCURE INC.\"},\"image\":{\"@id\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/#\\\/schema\\\/logo\\\/image\\\/\"}},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/#\\\/schema\\\/person\\\/53482b163015e8f48dc86f4132515727\",\"name\":\"Incure Content Team\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/85e856c6e17c9c44477ea1e0964ef5dc19c2a1ef29a741bb9bb742fcfc644fcc?s=96&d=mm&r=g\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/85e856c6e17c9c44477ea1e0964ef5dc19c2a1ef29a741bb9bb742fcfc644fcc?s=96&d=mm&r=g\",\"contentUrl\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/85e856c6e17c9c44477ea1e0964ef5dc19c2a1ef29a741bb9bb742fcfc644fcc?s=96&d=mm&r=g\",\"caption\":\"Incure Content Team\"},\"url\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/author\\\/kimleelcy\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Dome Coating Resin vs. Doming vs. Casting Resin: A Comparison - INCURE INC.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/incurelab.com\/wp\/dome-coating-resin-vs-doming","og_locale":"en_US","og_type":"article","og_title":"Dome Coating Resin vs. Doming vs. Casting Resin: A Comparison - INCURE INC.","og_description":"Three related processes get lumped together whenever a glossy, three-dimensional finish is involved: dome coating, doming, and casting. They use similar resin chemistry but differ in layer thickness, geometry, and purpose. Knowing which one your part needs keeps material cost and cycle time under control. Dome Coating Dome coating applies a thin, self-leveling resin layer [&hellip;]","og_url":"https:\/\/incurelab.com\/wp\/dome-coating-resin-vs-doming","og_site_name":"INCURE INC.","article_published_time":"2024-11-27T01:39:13+00:00","article_modified_time":"2026-08-29T12:33:40+00:00","author":"Incure Content Team","twitter_card":"summary_large_image","twitter_misc":{"Written by":"Incure Content Team","Est. reading time":"5 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/incurelab.com\/wp\/dome-coating-resin-vs-doming#article","isPartOf":{"@id":"https:\/\/incurelab.com\/wp\/dome-coating-resin-vs-doming"},"author":{"name":"Incure Content Team","@id":"https:\/\/incurelab.com\/wp\/#\/schema\/person\/53482b163015e8f48dc86f4132515727"},"headline":"Dome Coating Resin vs. Doming vs. Casting Resin: A Comparison","datePublished":"2024-11-27T01:39:13+00:00","dateModified":"2026-08-29T12:33:40+00:00","mainEntityOfPage":{"@id":"https:\/\/incurelab.com\/wp\/dome-coating-resin-vs-doming"},"wordCount":915,"publisher":{"@id":"https:\/\/incurelab.com\/wp\/#organization"},"keywords":["2D resin","3D resin","applications of resin","benefits of resin coating","casting resin","craft resin","custom resin products","decorative coating","DIY resin","DIY resin projects","dome coating resin","dome coating resin vs doming resin","doming resin","doming resin vs casting resin","how to choose the right resin technique","industrial resin","professional resin finishing","protective coating","resin application","resin coating","resin crafts","resin finishing","resin jewelry","resin materials","resin products","resin techniques"],"articleSection":["Epoxy","UV Adhesives"],"inLanguage":"en-US"},{"@type":"WebPage","@id":"https:\/\/incurelab.com\/wp\/dome-coating-resin-vs-doming","url":"https:\/\/incurelab.com\/wp\/dome-coating-resin-vs-doming","name":"Dome Coating Resin vs. Doming vs. Casting Resin: A Comparison - INCURE INC.","isPartOf":{"@id":"https:\/\/incurelab.com\/wp\/#website"},"datePublished":"2024-11-27T01:39:13+00:00","dateModified":"2026-08-29T12:33:40+00:00","breadcrumb":{"@id":"https:\/\/incurelab.com\/wp\/dome-coating-resin-vs-doming#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/incurelab.com\/wp\/dome-coating-resin-vs-doming"]}]},{"@type":"BreadcrumbList","@id":"https:\/\/incurelab.com\/wp\/dome-coating-resin-vs-doming#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/incurelab.com\/wp\/"},{"@type":"ListItem","position":2,"name":"Dome Coating Resin vs. Doming vs. Casting Resin: A Comparison"}]},{"@type":"WebSite","@id":"https:\/\/incurelab.com\/wp\/#website","url":"https:\/\/incurelab.com\/wp\/","name":"INCURE INC.","description":"Engineered Solutions. Trusted Worldwide","publisher":{"@id":"https:\/\/incurelab.com\/wp\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/incurelab.com\/wp\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/incurelab.com\/wp\/#organization","name":"INCURE INC.","url":"https:\/\/incurelab.com\/wp\/","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/incurelab.com\/wp\/#\/schema\/logo\/image\/","url":"https:\/\/incurelab.com\/wp\/wp-content\/uploads\/2025\/07\/incure-logo.jpeg","contentUrl":"https:\/\/incurelab.com\/wp\/wp-content\/uploads\/2025\/07\/incure-logo.jpeg","width":164,"height":45,"caption":"INCURE INC."},"image":{"@id":"https:\/\/incurelab.com\/wp\/#\/schema\/logo\/image\/"}},{"@type":"Person","@id":"https:\/\/incurelab.com\/wp\/#\/schema\/person\/53482b163015e8f48dc86f4132515727","name":"Incure Content Team","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/secure.gravatar.com\/avatar\/85e856c6e17c9c44477ea1e0964ef5dc19c2a1ef29a741bb9bb742fcfc644fcc?s=96&d=mm&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/85e856c6e17c9c44477ea1e0964ef5dc19c2a1ef29a741bb9bb742fcfc644fcc?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/85e856c6e17c9c44477ea1e0964ef5dc19c2a1ef29a741bb9bb742fcfc644fcc?s=96&d=mm&r=g","caption":"Incure Content Team"},"url":"https:\/\/incurelab.com\/wp\/author\/kimleelcy"}]}},"rttpg_featured_image_url":null,"rttpg_author":{"display_name":"Incure Content Team","author_link":"https:\/\/incurelab.com\/wp\/author\/kimleelcy"},"rttpg_comment":0,"rttpg_category":"<a href=\"https:\/\/incurelab.com\/wp\/category\/epoxy\" rel=\"category tag\">Epoxy<\/a> <a href=\"https:\/\/incurelab.com\/wp\/category\/uv-adhesives\" rel=\"category tag\">UV Adhesives<\/a>","rttpg_excerpt":"Three related processes get lumped together whenever a glossy, three-dimensional finish is involved: dome coating, doming, and casting. They use similar resin chemistry but differ in layer thickness, geometry, and purpose. Knowing which one your part needs keeps material cost and cycle time under control. Dome Coating Dome coating applies a thin, self-leveling resin layer&hellip;","_links":{"self":[{"href":"https:\/\/incurelab.com\/wp\/wp-json\/wp\/v2\/posts\/5819","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/incurelab.com\/wp\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/incurelab.com\/wp\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/incurelab.com\/wp\/wp-json\/wp\/v2\/users\/9"}],"replies":[{"embeddable":true,"href":"https:\/\/incurelab.com\/wp\/wp-json\/wp\/v2\/comments?post=5819"}],"version-history":[{"count":8,"href":"https:\/\/incurelab.com\/wp\/wp-json\/wp\/v2\/posts\/5819\/revisions"}],"predecessor-version":[{"id":22376,"href":"https:\/\/incurelab.com\/wp\/wp-json\/wp\/v2\/posts\/5819\/revisions\/22376"}],"wp:attachment":[{"href":"https:\/\/incurelab.com\/wp\/wp-json\/wp\/v2\/media?parent=5819"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/incurelab.com\/wp\/wp-json\/wp\/v2\/categories?post=5819"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/incurelab.com\/wp\/wp-json\/wp\/v2\/tags?post=5819"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}