{"id":8112,"date":"2025-08-21T22:45:11","date_gmt":"2025-08-21T22:45:11","guid":{"rendered":"https:\/\/incurelab.com\/wp\/?p=8112"},"modified":"2026-08-30T03:22:14","modified_gmt":"2026-08-30T03:22:14","slug":"acrylic-adhesive-vs-epoxy-a-manufacturers-guide-to-choosing-the-right-bond","status":"publish","type":"post","link":"https:\/\/incurelab.com\/wp\/acrylic-adhesive-vs-epoxy-a-manufacturers-guide-to-choosing-the-right-bond","title":{"rendered":"Acrylic Adhesive vs. Epoxy: Cure Speed and Production Throughput Compared"},"content":{"rendered":"

Choosing between acrylic and epoxy adhesives is, in most production settings, really a question about how much cure time a line can afford \u2014 and the two chemistries answer that question very differently.<\/p>\n

Two Cure Mechanisms, Two Throughput Profiles<\/h3>\n

Epoxy is typically a two-part resin-and-hardener system: mixing the components starts a cross-linking reaction that reaches handling strength over minutes to hours and a full cure over a day or more. That slower timeline buys a longer working time and the ability to fill larger gaps without the resin slumping, but it also means parts need to sit in a fixture \u2014 or move to a separate cure station \u2014 before the next assembly step can begin. Acrylic adhesives, by contrast, are often applied in a “no-mix” or bead-on-bead method, with resin and activator applied to separate surfaces and curing beginning only once the parts are brought together. That difference lets acrylics reach handling strength in minutes rather than hours, which is the main reason high-speed lines default to acrylic when cure time is the binding constraint.<\/p>\n

Translating Cure Speed Into Line Design<\/h3>\n

The throughput gap between the two chemistries shows up directly in fixture and conveyor design. A line built around epoxy typically needs either a long dwell conveyor or a batch of parallel fixture stations to keep parts moving while cure completes; a line built around acrylic can often run a single, shorter fixture zone because handling strength arrives so much faster. Retrofitting an epoxy-based line to acrylic \u2014 or the reverse \u2014 is rarely just a material swap; it usually means re-sizing the fixture or conveyor dwell time to match the new cure profile, and skipping that step is a common cause of bottlenecks after a chemistry change.<\/p>\n

Where Epoxy’s Slower Cure Is the Advantage, Not the Drawback<\/h3>\n

Throughput is not the only variable that matters. Epoxy’s longer working time gives an operator or a robotic dispense head room to correct part alignment before the bond sets \u2014 valuable on complex, multi-point assemblies where acrylic’s fast fixturing would leave no margin for adjustment. Epoxy’s gap-filling capability also outperforms acrylic on joints with uneven tolerances, since acrylic’s thinner bond-line requirement makes it less forgiving of parts that do not mate cleanly.<\/p>\n

Adhesion Range and Surface Preparation<\/h3>\n

Acrylics generally bond a wider range of plastics with minimal surface preparation, which shortens pre-bond process steps on mixed-material assemblies. Epoxies tend to need more surface preparation \u2014 abrasion or a primer, in many cases \u2014 to achieve their strongest adhesion to metals, ceramics, and composites, but they typically outperform acrylic on those specific substrate pairs once properly prepared. Neither chemistry is universally superior; the right choice depends on which substrate pair, surface condition, and cure-time budget the actual line is working with. Email Us<\/a> if you need a side-by-side cure-speed comparison run against your specific substrate pair and cycle-time target.<\/p>\n

Calculating the Real Cost of Cure Time<\/h3>\n

A faster-curing acrylic is not automatically the cheaper option once total line design is factored in. Epoxy’s per-unit material cost is often lower, and for lower-volume runs where fixture dwell time is not the bottleneck, the throughput advantage of acrylic may never be realized in practice. The calculation that matters is units per hour at the target production volume, weighed against the fixture or conveyor investment each chemistry requires \u2014 not cure time in isolation. For assemblies where UV-curable chemistry might beat both acrylic and epoxy on cycle time, comparing dry time for quick repairs<\/a> against an in-line UV conveyor curing setup<\/a> is worth doing before finalizing a line design.<\/p>\n

Mixed-Chemistry Lines and Equipment Considerations<\/h3>\n

Some assemblies genuinely benefit from using both chemistries on different joints within the same product \u2014 epoxy on a structural, gap-filling connection and acrylic on a faster-cycling secondary bond, for example. Running mixed chemistries on one line raises practical questions about dispense equipment cross-contamination, since epoxy and acrylic components should not share dispense tips or mixing nozzles without a validated cleaning step between uses. Planning for this at the line-design stage, rather than discovering the conflict after equipment is already installed, avoids a costly retrofit later.<\/p>\n

Cost Modeling Beyond the Adhesive Line Item<\/h3>\n

A full cost comparison between acrylic and epoxy should include more than the per-unit adhesive price. Epoxy’s longer cure time often means more work-in-process inventory sitting in a fixture or on a cure rack at any given moment, which ties up floor space and capital that a faster-cycling acrylic process would free up. Conversely, epoxy’s simpler dispense equipment \u2014 often just a static mixer rather than a dual-bead applicator \u2014 can mean a lower initial capital outlay for lower-volume production. Modeling total cost per unit at the actual target volume, rather than comparing adhesive unit price alone, gives a more accurate picture of which chemistry is genuinely more economical for a specific line.<\/p>\n

Matching the Chemistry to the Line, Not the Other Way Around<\/h3>\n

The acrylic-versus-epoxy decision is best made from the line design backward: start with the target units-per-hour, the substrate pair, and the tolerance on part fit, then select the chemistry that actually supports that throughput without forcing an expensive fixture redesign. Where a plastic-bonding joint elsewhere in the same assembly needs a specific grade rather than a generic acrylic, a structured grade comparison by substrate and mechanical demand<\/a> is a useful reference point. Contact Our Team<\/a> to work through cure speed and throughput requirements for your specific assembly.<\/p>\n

Visit www.incurelab.com<\/a> for more information.<\/p>\n","protected":false},"excerpt":{"rendered":"

Choosing between acrylic and epoxy adhesives is, in most production settings, really a question about how much cure time a line can afford \u2014 and the two chemistries answer that question very differently. Two Cure Mechanisms, Two Throughput Profiles Epoxy is typically a two-part resin-and-hardener system: mixing the components starts a cross-linking reaction that reaches […]<\/p>\n","protected":false},"author":9,"featured_media":0,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"ocean_front_end_style_editor":"no","ocean_post_layout":"","ocean_both_sidebars_style":"","ocean_both_sidebars_content_width":0,"ocean_both_sidebars_sidebars_width":0,"ocean_sidebar":"","ocean_second_sidebar":"","ocean_disable_margins":"enable","ocean_add_body_class":"","ocean_shortcode_before_top_bar":"","ocean_shortcode_after_top_bar":"","ocean_shortcode_before_header":"","ocean_shortcode_after_header":"","ocean_has_shortcode":"","ocean_shortcode_after_title":"","ocean_shortcode_before_footer_widgets":"","ocean_shortcode_after_footer_widgets":"","ocean_shortcode_before_footer_bottom":"","ocean_shortcode_after_footer_bottom":"","ocean_display_top_bar":"default","ocean_display_header":"default","ocean_header_style":"","ocean_center_header_left_menu":"","ocean_custom_header_template":"","ocean_custom_logo":0,"ocean_custom_retina_logo":0,"ocean_custom_logo_max_width":0,"ocean_custom_logo_tablet_max_width":0,"ocean_custom_logo_mobile_max_width":0,"ocean_custom_logo_max_height":0,"ocean_custom_logo_tablet_max_height":0,"ocean_custom_logo_mobile_max_height":0,"ocean_header_custom_menu":"","ocean_menu_typo_font_family":"","ocean_menu_typo_font_subset":"","ocean_menu_typo_font_size":0,"ocean_menu_typo_font_size_tablet":0,"ocean_menu_typo_font_size_mobile":0,"ocean_menu_typo_font_size_unit":"px","ocean_menu_typo_font_weight":"","ocean_menu_typo_font_weight_tablet":"","ocean_menu_typo_font_weight_mobile":"","ocean_menu_typo_transform":"","ocean_menu_typo_transform_tablet":"","ocean_menu_typo_transform_mobile":"","ocean_menu_typo_line_height":0,"ocean_menu_typo_line_height_tablet":0,"ocean_menu_typo_line_height_mobile":0,"ocean_menu_typo_line_height_unit":"","ocean_menu_typo_spacing":0,"ocean_menu_typo_spacing_tablet":0,"ocean_menu_typo_spacing_mobile":0,"ocean_menu_typo_spacing_unit":"","ocean_menu_link_color":"","ocean_menu_link_color_hover":"","ocean_menu_link_color_active":"","ocean_menu_link_background":"","ocean_menu_link_hover_background":"","ocean_menu_link_active_background":"","ocean_menu_social_links_bg":"","ocean_menu_social_hover_links_bg":"","ocean_menu_social_links_color":"","ocean_menu_social_hover_links_color":"","ocean_disable_title":"default","ocean_disable_heading":"default","ocean_post_title":"","ocean_post_subheading":"","ocean_post_title_style":"","ocean_post_title_background_color":"","ocean_post_title_background":0,"ocean_post_title_bg_image_position":"","ocean_post_title_bg_image_attachment":"","ocean_post_title_bg_image_repeat":"","ocean_post_title_bg_image_size":"","ocean_post_title_height":0,"ocean_post_title_bg_overlay":0.5,"ocean_post_title_bg_overlay_color":"","ocean_disable_breadcrumbs":"default","ocean_breadcrumbs_color":"","ocean_breadcrumbs_separator_color":"","ocean_breadcrumbs_links_color":"","ocean_breadcrumbs_links_hover_color":"","ocean_display_footer_widgets":"default","ocean_display_footer_bottom":"default","ocean_custom_footer_template":"","ocean_post_oembed":"","ocean_post_self_hosted_media":"","ocean_post_video_embed":"","ocean_link_format":"","ocean_link_format_target":"self","ocean_quote_format":"","ocean_quote_format_link":"post","ocean_gallery_link_images":"on","ocean_gallery_id":[],"footnotes":""},"categories":[1],"tags":[],"class_list":["post-8112","post","type-post","status-publish","format-standard","hentry","category-uncategorized","entry"],"yoast_head":"\nAcrylic Adhesive vs. Epoxy: Cure Speed and Production Throughput Compared - INCURE INC.<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/incurelab.com\/wp\/acrylic-adhesive-vs-epoxy-a-manufacturers-guide-to-choosing-the-right-bond\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Acrylic Adhesive vs. Epoxy: Cure Speed and Production Throughput Compared - INCURE INC.\" \/>\n<meta property=\"og:description\" content=\"Choosing between acrylic and epoxy adhesives is, in most production settings, really a question about how much cure time a line can afford \u2014 and the two chemistries answer that question very differently. Two Cure Mechanisms, Two Throughput Profiles Epoxy is typically a two-part resin-and-hardener system: mixing the components starts a cross-linking reaction that reaches […]\" \/>\n<meta property=\"og:url\" content=\"https:\/\/incurelab.com\/wp\/acrylic-adhesive-vs-epoxy-a-manufacturers-guide-to-choosing-the-right-bond\" \/>\n<meta property=\"og:site_name\" content=\"INCURE INC.\" \/>\n<meta property=\"article:published_time\" content=\"2025-08-21T22:45:11+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2026-08-30T03:22:14+00:00\" \/>\n<meta name=\"author\" content=\"Incure Content Team\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"Incure Content Team\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"4 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/acrylic-adhesive-vs-epoxy-a-manufacturers-guide-to-choosing-the-right-bond#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/acrylic-adhesive-vs-epoxy-a-manufacturers-guide-to-choosing-the-right-bond\"},\"author\":{\"name\":\"Incure Content Team\",\"@id\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/#\\\/schema\\\/person\\\/53482b163015e8f48dc86f4132515727\"},\"headline\":\"Acrylic Adhesive vs. Epoxy: Cure Speed and Production Throughput Compared\",\"datePublished\":\"2025-08-21T22:45:11+00:00\",\"dateModified\":\"2026-08-30T03:22:14+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/acrylic-adhesive-vs-epoxy-a-manufacturers-guide-to-choosing-the-right-bond\"},\"wordCount\":917,\"publisher\":{\"@id\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/#organization\"},\"inLanguage\":\"en-US\"},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/acrylic-adhesive-vs-epoxy-a-manufacturers-guide-to-choosing-the-right-bond\",\"url\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/acrylic-adhesive-vs-epoxy-a-manufacturers-guide-to-choosing-the-right-bond\",\"name\":\"Acrylic Adhesive vs. Epoxy: Cure Speed and Production Throughput Compared - INCURE INC.\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/#website\"},\"datePublished\":\"2025-08-21T22:45:11+00:00\",\"dateModified\":\"2026-08-30T03:22:14+00:00\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/acrylic-adhesive-vs-epoxy-a-manufacturers-guide-to-choosing-the-right-bond#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/incurelab.com\\\/wp\\\/acrylic-adhesive-vs-epoxy-a-manufacturers-guide-to-choosing-the-right-bond\"]}]},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/acrylic-adhesive-vs-epoxy-a-manufacturers-guide-to-choosing-the-right-bond#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Acrylic Adhesive vs. Epoxy: Cure Speed and Production Throughput Compared\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/#website\",\"url\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/\",\"name\":\"INCURE INC.\",\"description\":\"Engineered Solutions. Trusted Worldwide\",\"publisher\":{\"@id\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/#organization\",\"name\":\"INCURE INC.\",\"url\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/wp-content\\\/uploads\\\/2025\\\/07\\\/incure-logo.jpeg\",\"contentUrl\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/wp-content\\\/uploads\\\/2025\\\/07\\\/incure-logo.jpeg\",\"width\":164,\"height\":45,\"caption\":\"INCURE INC.\"},\"image\":{\"@id\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/#\\\/schema\\\/logo\\\/image\\\/\"}},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/#\\\/schema\\\/person\\\/53482b163015e8f48dc86f4132515727\",\"name\":\"Incure Content Team\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/85e856c6e17c9c44477ea1e0964ef5dc19c2a1ef29a741bb9bb742fcfc644fcc?s=96&d=mm&r=g\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/85e856c6e17c9c44477ea1e0964ef5dc19c2a1ef29a741bb9bb742fcfc644fcc?s=96&d=mm&r=g\",\"contentUrl\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/85e856c6e17c9c44477ea1e0964ef5dc19c2a1ef29a741bb9bb742fcfc644fcc?s=96&d=mm&r=g\",\"caption\":\"Incure Content Team\"},\"url\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/author\\\/kimleelcy\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Acrylic Adhesive vs. Epoxy: Cure Speed and Production Throughput Compared - INCURE INC.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/incurelab.com\/wp\/acrylic-adhesive-vs-epoxy-a-manufacturers-guide-to-choosing-the-right-bond","og_locale":"en_US","og_type":"article","og_title":"Acrylic Adhesive vs. Epoxy: Cure Speed and Production Throughput Compared - INCURE INC.","og_description":"Choosing between acrylic and epoxy adhesives is, in most production settings, really a question about how much cure time a line can afford \u2014 and the two chemistries answer that question very differently. Two Cure Mechanisms, Two Throughput Profiles Epoxy is typically a two-part resin-and-hardener system: mixing the components starts a cross-linking reaction that reaches […]","og_url":"https:\/\/incurelab.com\/wp\/acrylic-adhesive-vs-epoxy-a-manufacturers-guide-to-choosing-the-right-bond","og_site_name":"INCURE INC.","article_published_time":"2025-08-21T22:45:11+00:00","article_modified_time":"2026-08-30T03:22:14+00:00","author":"Incure Content Team","twitter_card":"summary_large_image","twitter_misc":{"Written by":"Incure Content Team","Est. reading time":"4 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/incurelab.com\/wp\/acrylic-adhesive-vs-epoxy-a-manufacturers-guide-to-choosing-the-right-bond#article","isPartOf":{"@id":"https:\/\/incurelab.com\/wp\/acrylic-adhesive-vs-epoxy-a-manufacturers-guide-to-choosing-the-right-bond"},"author":{"name":"Incure Content Team","@id":"https:\/\/incurelab.com\/wp\/#\/schema\/person\/53482b163015e8f48dc86f4132515727"},"headline":"Acrylic Adhesive vs. Epoxy: Cure Speed and Production Throughput Compared","datePublished":"2025-08-21T22:45:11+00:00","dateModified":"2026-08-30T03:22:14+00:00","mainEntityOfPage":{"@id":"https:\/\/incurelab.com\/wp\/acrylic-adhesive-vs-epoxy-a-manufacturers-guide-to-choosing-the-right-bond"},"wordCount":917,"publisher":{"@id":"https:\/\/incurelab.com\/wp\/#organization"},"inLanguage":"en-US"},{"@type":"WebPage","@id":"https:\/\/incurelab.com\/wp\/acrylic-adhesive-vs-epoxy-a-manufacturers-guide-to-choosing-the-right-bond","url":"https:\/\/incurelab.com\/wp\/acrylic-adhesive-vs-epoxy-a-manufacturers-guide-to-choosing-the-right-bond","name":"Acrylic Adhesive vs. Epoxy: Cure Speed and Production Throughput Compared - INCURE INC.","isPartOf":{"@id":"https:\/\/incurelab.com\/wp\/#website"},"datePublished":"2025-08-21T22:45:11+00:00","dateModified":"2026-08-30T03:22:14+00:00","breadcrumb":{"@id":"https:\/\/incurelab.com\/wp\/acrylic-adhesive-vs-epoxy-a-manufacturers-guide-to-choosing-the-right-bond#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/incurelab.com\/wp\/acrylic-adhesive-vs-epoxy-a-manufacturers-guide-to-choosing-the-right-bond"]}]},{"@type":"BreadcrumbList","@id":"https:\/\/incurelab.com\/wp\/acrylic-adhesive-vs-epoxy-a-manufacturers-guide-to-choosing-the-right-bond#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/incurelab.com\/wp\/"},{"@type":"ListItem","position":2,"name":"Acrylic Adhesive vs. Epoxy: Cure Speed and Production Throughput Compared"}]},{"@type":"WebSite","@id":"https:\/\/incurelab.com\/wp\/#website","url":"https:\/\/incurelab.com\/wp\/","name":"INCURE INC.","description":"Engineered Solutions. Trusted Worldwide","publisher":{"@id":"https:\/\/incurelab.com\/wp\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/incurelab.com\/wp\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/incurelab.com\/wp\/#organization","name":"INCURE INC.","url":"https:\/\/incurelab.com\/wp\/","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/incurelab.com\/wp\/#\/schema\/logo\/image\/","url":"https:\/\/incurelab.com\/wp\/wp-content\/uploads\/2025\/07\/incure-logo.jpeg","contentUrl":"https:\/\/incurelab.com\/wp\/wp-content\/uploads\/2025\/07\/incure-logo.jpeg","width":164,"height":45,"caption":"INCURE INC."},"image":{"@id":"https:\/\/incurelab.com\/wp\/#\/schema\/logo\/image\/"}},{"@type":"Person","@id":"https:\/\/incurelab.com\/wp\/#\/schema\/person\/53482b163015e8f48dc86f4132515727","name":"Incure Content Team","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/secure.gravatar.com\/avatar\/85e856c6e17c9c44477ea1e0964ef5dc19c2a1ef29a741bb9bb742fcfc644fcc?s=96&d=mm&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/85e856c6e17c9c44477ea1e0964ef5dc19c2a1ef29a741bb9bb742fcfc644fcc?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/85e856c6e17c9c44477ea1e0964ef5dc19c2a1ef29a741bb9bb742fcfc644fcc?s=96&d=mm&r=g","caption":"Incure Content Team"},"url":"https:\/\/incurelab.com\/wp\/author\/kimleelcy"}]}},"rttpg_featured_image_url":null,"rttpg_author":{"display_name":"Incure Content Team","author_link":"https:\/\/incurelab.com\/wp\/author\/kimleelcy"},"rttpg_comment":0,"rttpg_category":"<a href=\"https:\/\/incurelab.com\/wp\/category\/uncategorized\" rel=\"category tag\">Uncategorized<\/a>","rttpg_excerpt":"Choosing between acrylic and epoxy adhesives is, in most production settings, really a question about how much cure time a line can afford \u2014 and the two chemistries answer that question very differently. Two Cure Mechanisms, Two Throughput Profiles Epoxy is typically a two-part resin-and-hardener system: mixing the components starts a cross-linking reaction that reaches…","_links":{"self":[{"href":"https:\/\/incurelab.com\/wp\/wp-json\/wp\/v2\/posts\/8112","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/incurelab.com\/wp\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/incurelab.com\/wp\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/incurelab.com\/wp\/wp-json\/wp\/v2\/users\/9"}],"replies":[{"embeddable":true,"href":"https:\/\/incurelab.com\/wp\/wp-json\/wp\/v2\/comments?post=8112"}],"version-history":[{"count":3,"href":"https:\/\/incurelab.com\/wp\/wp-json\/wp\/v2\/posts\/8112\/revisions"}],"predecessor-version":[{"id":22656,"href":"https:\/\/incurelab.com\/wp\/wp-json\/wp\/v2\/posts\/8112\/revisions\/22656"}],"wp:attachment":[{"href":"https:\/\/incurelab.com\/wp\/wp-json\/wp\/v2\/media?parent=8112"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/incurelab.com\/wp\/wp-json\/wp\/v2\/categories?post=8112"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/incurelab.com\/wp\/wp-json\/wp\/v2\/tags?post=8112"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}