{"id":9993,"date":"2025-10-11T11:47:20","date_gmt":"2025-10-11T11:47:20","guid":{"rendered":"https:\/\/incurelab.com\/wp\/?p=9993"},"modified":"2026-07-23T06:44:54","modified_gmt":"2026-07-23T06:44:54","slug":"encapsulating-wires-and-solder-joints-for-extreme-reliability","status":"publish","type":"post","link":"https:\/\/incurelab.com\/wp\/encapsulating-wires-and-solder-joints-for-extreme-reliability","title":{"rendered":"Encapsulating Wires and Solder Joints for Extreme Reliability"},"content":{"rendered":"

A solder joint rarely fails the day it’s made \u2014 it fails months later, after enough power-on and power-off cycles have fatigued the metal past its limit. Encapsulating the joint with the right adhesive is what keeps that clock from ever starting.<\/p>\n

Why Solder Joints Are the Weakest Point in Any Wire Harness<\/h3>\n

In modern electronics and complex wire harnesses, solder joints and exposed wire connections represent the most vulnerable points in the entire system. They face mechanical stress from vibration and physical pulling, environmental exposure to moisture and dust, and most critically, thermal cycling \u2014 the repeated heating and cooling that happens every time a device powers on and off. That cycling causes the solder, the wire, and the surrounding materials to expand and contract at different rates, and over enough cycles, this differential movement produces micro-cracking in the solder joint itself, eventually leading to intermittent contact or complete electrical failure. Encapsulation is the standard preventive measure: it insulates the connection, provides shock absorption against mechanical stress, and physically blocks the moisture and dust that would otherwise accelerate corrosion at the joint.<\/p>\n

A standard “super glue” isn’t engineered for this environment and will not survive the demanding thermal and mechanical conditions sensitive electronics routinely experience.<\/p>\n

A Thermal-Cycling-Resistant Cyanoacrylate for Encapsulation<\/h3>\n

A specialized cyanoacrylate formulated for thermal cycling resistance provides both instant structural bonding and genuine defense against the expansion-and-contraction stress that destroys unprotected connections. This class of chemistry overlaps with the high-temperature CA formulation used in Incure’s Heat-Resist\u2122 line, engineered specifically for applications where a bonded or encapsulated joint must maintain integrity through repeated or sustained elevated-temperature exposure rather than at room temperature alone. Medium-to-high viscosity is generally preferable for encapsulation specifically, since it allows the material to fully coat a joint and fill minor voids rather than running off before it cures \u2014 and as a cyanoacrylate, the cured material is inherently non-conductive, providing genuine electrical insulation over the exposed metal joint.<\/p>\n

Email Us<\/a> for guidance on selecting a thermal-cycling-resistant encapsulation adhesive for a specific solder joint or wire harness application.<\/p>\n

Application Steps for Encapsulating Solder Joints<\/h3>\n
    \n
  1. Degrease thoroughly.<\/strong> Use an electronics-safe solvent such as isopropyl alcohol or acetone to remove all flux residue, oils, or dirt from the solder joint and the adjacent wire insulation before application.<\/li>\n
  2. Dispense with a precision tip.<\/strong> Apply a small, controlled bead of adhesive directly over the solder joint and the immediately adjacent wire insulation, allowing it to flow and fully cover the connection.<\/li>\n
  3. Consider a cure accelerator for small bond areas.<\/strong> Because a small encapsulation area limits exposure to ambient atmospheric moisture (which cyanoacrylates rely on to cure), a compatible activator spray applied sparingly afterward ensures a complete, strong cure.<\/li>\n
  4. Visually verify full coverage.<\/strong> Confirm the adhesive has cured to a hard, resilient coating that completely covers the joint and the critical transition point where the wire insulation meets the solder connection.<\/li>\n<\/ol>\n

    Diagnosing Encapsulation That Fails Prematurely<\/h3>\n

    If an encapsulated joint fails despite the coating appearing intact, the most common cause is incomplete coverage at the transition point where wire insulation meets the solder joint \u2014 a gap here leaves exactly the highest-stress region of the assembly unprotected, since that transition is where mechanical flexing concentrates. A second frequent issue is applying a room-temperature-rated cyanoacrylate to a joint located near a genuinely hot component, where standard formulations gradually lose adhesion; confirming the encapsulation adhesive’s continuous-service-temperature rating against the joint’s real thermal environment prevents this.<\/p>\n

    Q: How many thermal cycles can a properly encapsulated joint typically withstand before showing wear?<\/strong>
    \nA: Thermal-cycling-resistant formulations are specifically engineered to absorb the expansion-and-contraction stress of repeated power-on\/power-off cycling well beyond what an unprotected joint or a standard-formulation adhesive can tolerate, though the exact service life depends on the temperature range and cycling frequency of the specific application.<\/p>\n

    Q: Does encapsulation eliminate the need for strain relief elsewhere in the harness?<\/strong>
    \nA: No \u2014 encapsulation protects the specific joint it covers, but a harness still benefits from proper strain relief at connector exits and bend points elsewhere, since encapsulation is a targeted fix for a vulnerable connection, not a substitute for overall harness design practices.<\/p>\n

    Encapsulation Versus Conformal Coating: Choosing the Right Scope<\/h3>\n

    It’s worth distinguishing targeted joint encapsulation from full-board conformal coating, since they solve overlapping but distinct problems. A conformal coating protects an entire assembly broadly against moisture and dust, applied as a thin film across the whole board. Targeted encapsulation with a thermal-cycling-resistant cyanoacrylate, by contrast, concentrates protection and mechanical reinforcement exactly where it’s needed most \u2014 a specific solder joint or wire exit point identified as a known stress concentration \u2014 without the added process time and material cost of coating an entire assembly. Many reliable electronics designs use both: a general conformal coating for board-wide protection, supplemented by targeted cyanoacrylate encapsulation at the specific joints and connector exits known to see the highest mechanical and thermal stress in service.<\/p>\n

    Protecting critical electrical connections against thermal and mechanical stress is a foundational reliability practice across electronics manufacturing. For related reading on thermal-cycling-driven failure and adhesive selection, see how CTE mismatch drives adhesive bond failure<\/a> and which UV glue delivers higher bond strength<\/a>.<\/p>\n

    Contact Our Team<\/a> for guidance on encapsulation adhesive selection for wire harness and solder joint protection.<\/p>\n

    Visit www.incurelab.com<\/a> for more information.<\/p>\n","protected":false},"excerpt":{"rendered":"

    A solder joint rarely fails the day it’s made \u2014 it fails months later, after enough power-on and power-off cycles have fatigued the metal past its limit. Encapsulating the joint with the right adhesive is what keeps that clock from ever starting. Why Solder Joints Are the Weakest Point in Any Wire Harness In modern […]<\/p>\n","protected":false},"author":2,"featured_media":0,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"ocean_front_end_style_editor":"no","ocean_post_layout":"","ocean_both_sidebars_style":"","ocean_both_sidebars_content_width":0,"ocean_both_sidebars_sidebars_width":0,"ocean_sidebar":"","ocean_second_sidebar":"","ocean_disable_margins":"enable","ocean_add_body_class":"","ocean_shortcode_before_top_bar":"","ocean_shortcode_after_top_bar":"","ocean_shortcode_before_header":"","ocean_shortcode_after_header":"","ocean_has_shortcode":"","ocean_shortcode_after_title":"","ocean_shortcode_before_footer_widgets":"","ocean_shortcode_after_footer_widgets":"","ocean_shortcode_before_footer_bottom":"","ocean_shortcode_after_footer_bottom":"","ocean_display_top_bar":"default","ocean_display_header":"default","ocean_header_style":"","ocean_center_header_left_menu":"","ocean_custom_header_template":"","ocean_custom_logo":0,"ocean_custom_retina_logo":0,"ocean_custom_logo_max_width":0,"ocean_custom_logo_tablet_max_width":0,"ocean_custom_logo_mobile_max_width":0,"ocean_custom_logo_max_height":0,"ocean_custom_logo_tablet_max_height":0,"ocean_custom_logo_mobile_max_height":0,"ocean_header_custom_menu":"","ocean_menu_typo_font_family":"","ocean_menu_typo_font_subset":"","ocean_menu_typo_font_size":0,"ocean_menu_typo_font_size_tablet":0,"ocean_menu_typo_font_size_mobile":0,"ocean_menu_typo_font_size_unit":"px","ocean_menu_typo_font_weight":"","ocean_menu_typo_font_weight_tablet":"","ocean_menu_typo_font_weight_mobile":"","ocean_menu_typo_transform":"","ocean_menu_typo_transform_tablet":"","ocean_menu_typo_transform_mobile":"","ocean_menu_typo_line_height":0,"ocean_menu_typo_line_height_tablet":0,"ocean_menu_typo_line_height_mobile":0,"ocean_menu_typo_line_height_unit":"","ocean_menu_typo_spacing":0,"ocean_menu_typo_spacing_tablet":0,"ocean_menu_typo_spacing_mobile":0,"ocean_menu_typo_spacing_unit":"","ocean_menu_link_color":"","ocean_menu_link_color_hover":"","ocean_menu_link_color_active":"","ocean_menu_link_background":"","ocean_menu_link_hover_background":"","ocean_menu_link_active_background":"","ocean_menu_social_links_bg":"","ocean_menu_social_hover_links_bg":"","ocean_menu_social_links_color":"","ocean_menu_social_hover_links_color":"","ocean_disable_title":"default","ocean_disable_heading":"default","ocean_post_title":"","ocean_post_subheading":"","ocean_post_title_style":"","ocean_post_title_background_color":"","ocean_post_title_background":0,"ocean_post_title_bg_image_position":"","ocean_post_title_bg_image_attachment":"","ocean_post_title_bg_image_repeat":"","ocean_post_title_bg_image_size":"","ocean_post_title_height":0,"ocean_post_title_bg_overlay":0.5,"ocean_post_title_bg_overlay_color":"","ocean_disable_breadcrumbs":"default","ocean_breadcrumbs_color":"","ocean_breadcrumbs_separator_color":"","ocean_breadcrumbs_links_color":"","ocean_breadcrumbs_links_hover_color":"","ocean_display_footer_widgets":"default","ocean_display_footer_bottom":"default","ocean_custom_footer_template":"","ocean_post_oembed":"","ocean_post_self_hosted_media":"","ocean_post_video_embed":"","ocean_link_format":"","ocean_link_format_target":"self","ocean_quote_format":"","ocean_quote_format_link":"post","ocean_gallery_link_images":"on","ocean_gallery_id":[],"footnotes":""},"categories":[1],"tags":[],"class_list":["post-9993","post","type-post","status-publish","format-standard","hentry","category-uncategorized","entry"],"yoast_head":"\nEncapsulating Wires and Solder Joints for Extreme Reliability - INCURE INC.<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/incurelab.com\/wp\/encapsulating-wires-and-solder-joints-for-extreme-reliability\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Encapsulating Wires and Solder Joints for Extreme Reliability - INCURE INC.\" \/>\n<meta property=\"og:description\" content=\"A solder joint rarely fails the day it’s made \u2014 it fails months later, after enough power-on and power-off cycles have fatigued the metal past its limit. Encapsulating the joint with the right adhesive is what keeps that clock from ever starting. Why Solder Joints Are the Weakest Point in Any Wire Harness In modern […]\" \/>\n<meta property=\"og:url\" content=\"https:\/\/incurelab.com\/wp\/encapsulating-wires-and-solder-joints-for-extreme-reliability\" \/>\n<meta property=\"og:site_name\" content=\"INCURE INC.\" \/>\n<meta property=\"article:published_time\" content=\"2025-10-11T11:47:20+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2026-07-23T06:44:54+00:00\" \/>\n<meta name=\"author\" content=\"Lee\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"Lee\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"3 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/encapsulating-wires-and-solder-joints-for-extreme-reliability#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/encapsulating-wires-and-solder-joints-for-extreme-reliability\"},\"author\":{\"name\":\"Lee\",\"@id\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/#\\\/schema\\\/person\\\/0dde694b221e11513acd9917d9b1eb25\"},\"headline\":\"Encapsulating Wires and Solder Joints for Extreme Reliability\",\"datePublished\":\"2025-10-11T11:47:20+00:00\",\"dateModified\":\"2026-07-23T06:44:54+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/encapsulating-wires-and-solder-joints-for-extreme-reliability\"},\"wordCount\":892,\"publisher\":{\"@id\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/#organization\"},\"inLanguage\":\"en-US\"},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/encapsulating-wires-and-solder-joints-for-extreme-reliability\",\"url\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/encapsulating-wires-and-solder-joints-for-extreme-reliability\",\"name\":\"Encapsulating Wires and Solder Joints for Extreme Reliability - INCURE INC.\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/#website\"},\"datePublished\":\"2025-10-11T11:47:20+00:00\",\"dateModified\":\"2026-07-23T06:44:54+00:00\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/encapsulating-wires-and-solder-joints-for-extreme-reliability#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/incurelab.com\\\/wp\\\/encapsulating-wires-and-solder-joints-for-extreme-reliability\"]}]},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/encapsulating-wires-and-solder-joints-for-extreme-reliability#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Encapsulating Wires and Solder Joints for Extreme Reliability\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/#website\",\"url\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/\",\"name\":\"INCURE INC.\",\"description\":\"Engineered Solutions. Trusted Worldwide\",\"publisher\":{\"@id\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/#organization\",\"name\":\"INCURE INC.\",\"url\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/wp-content\\\/uploads\\\/2025\\\/07\\\/incure-logo.jpeg\",\"contentUrl\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/wp-content\\\/uploads\\\/2025\\\/07\\\/incure-logo.jpeg\",\"width\":164,\"height\":45,\"caption\":\"INCURE INC.\"},\"image\":{\"@id\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/#\\\/schema\\\/logo\\\/image\\\/\"}},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/#\\\/schema\\\/person\\\/0dde694b221e11513acd9917d9b1eb25\",\"name\":\"Lee\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/92b03de6aab6da2d64163f2609a89b063d1939682c7b5dbadd60a71286e84260?s=96&d=mm&r=g\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/92b03de6aab6da2d64163f2609a89b063d1939682c7b5dbadd60a71286e84260?s=96&d=mm&r=g\",\"contentUrl\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/92b03de6aab6da2d64163f2609a89b063d1939682c7b5dbadd60a71286e84260?s=96&d=mm&r=g\",\"caption\":\"Lee\"},\"url\":\"https:\\\/\\\/incurelab.com\\\/wp\\\/author\\\/kim\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Encapsulating Wires and Solder Joints for Extreme Reliability - INCURE INC.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/incurelab.com\/wp\/encapsulating-wires-and-solder-joints-for-extreme-reliability","og_locale":"en_US","og_type":"article","og_title":"Encapsulating Wires and Solder Joints for Extreme Reliability - INCURE INC.","og_description":"A solder joint rarely fails the day it’s made \u2014 it fails months later, after enough power-on and power-off cycles have fatigued the metal past its limit. Encapsulating the joint with the right adhesive is what keeps that clock from ever starting. Why Solder Joints Are the Weakest Point in Any Wire Harness In modern […]","og_url":"https:\/\/incurelab.com\/wp\/encapsulating-wires-and-solder-joints-for-extreme-reliability","og_site_name":"INCURE INC.","article_published_time":"2025-10-11T11:47:20+00:00","article_modified_time":"2026-07-23T06:44:54+00:00","author":"Lee","twitter_card":"summary_large_image","twitter_misc":{"Written by":"Lee","Est. reading time":"3 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/incurelab.com\/wp\/encapsulating-wires-and-solder-joints-for-extreme-reliability#article","isPartOf":{"@id":"https:\/\/incurelab.com\/wp\/encapsulating-wires-and-solder-joints-for-extreme-reliability"},"author":{"name":"Lee","@id":"https:\/\/incurelab.com\/wp\/#\/schema\/person\/0dde694b221e11513acd9917d9b1eb25"},"headline":"Encapsulating Wires and Solder Joints for Extreme Reliability","datePublished":"2025-10-11T11:47:20+00:00","dateModified":"2026-07-23T06:44:54+00:00","mainEntityOfPage":{"@id":"https:\/\/incurelab.com\/wp\/encapsulating-wires-and-solder-joints-for-extreme-reliability"},"wordCount":892,"publisher":{"@id":"https:\/\/incurelab.com\/wp\/#organization"},"inLanguage":"en-US"},{"@type":"WebPage","@id":"https:\/\/incurelab.com\/wp\/encapsulating-wires-and-solder-joints-for-extreme-reliability","url":"https:\/\/incurelab.com\/wp\/encapsulating-wires-and-solder-joints-for-extreme-reliability","name":"Encapsulating Wires and Solder Joints for Extreme Reliability - INCURE INC.","isPartOf":{"@id":"https:\/\/incurelab.com\/wp\/#website"},"datePublished":"2025-10-11T11:47:20+00:00","dateModified":"2026-07-23T06:44:54+00:00","breadcrumb":{"@id":"https:\/\/incurelab.com\/wp\/encapsulating-wires-and-solder-joints-for-extreme-reliability#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/incurelab.com\/wp\/encapsulating-wires-and-solder-joints-for-extreme-reliability"]}]},{"@type":"BreadcrumbList","@id":"https:\/\/incurelab.com\/wp\/encapsulating-wires-and-solder-joints-for-extreme-reliability#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/incurelab.com\/wp\/"},{"@type":"ListItem","position":2,"name":"Encapsulating Wires and Solder Joints for Extreme Reliability"}]},{"@type":"WebSite","@id":"https:\/\/incurelab.com\/wp\/#website","url":"https:\/\/incurelab.com\/wp\/","name":"INCURE INC.","description":"Engineered Solutions. Trusted Worldwide","publisher":{"@id":"https:\/\/incurelab.com\/wp\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/incurelab.com\/wp\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/incurelab.com\/wp\/#organization","name":"INCURE INC.","url":"https:\/\/incurelab.com\/wp\/","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/incurelab.com\/wp\/#\/schema\/logo\/image\/","url":"https:\/\/incurelab.com\/wp\/wp-content\/uploads\/2025\/07\/incure-logo.jpeg","contentUrl":"https:\/\/incurelab.com\/wp\/wp-content\/uploads\/2025\/07\/incure-logo.jpeg","width":164,"height":45,"caption":"INCURE INC."},"image":{"@id":"https:\/\/incurelab.com\/wp\/#\/schema\/logo\/image\/"}},{"@type":"Person","@id":"https:\/\/incurelab.com\/wp\/#\/schema\/person\/0dde694b221e11513acd9917d9b1eb25","name":"Lee","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/secure.gravatar.com\/avatar\/92b03de6aab6da2d64163f2609a89b063d1939682c7b5dbadd60a71286e84260?s=96&d=mm&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/92b03de6aab6da2d64163f2609a89b063d1939682c7b5dbadd60a71286e84260?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/92b03de6aab6da2d64163f2609a89b063d1939682c7b5dbadd60a71286e84260?s=96&d=mm&r=g","caption":"Lee"},"url":"https:\/\/incurelab.com\/wp\/author\/kim"}]}},"rttpg_featured_image_url":null,"rttpg_author":{"display_name":"Lee","author_link":"https:\/\/incurelab.com\/wp\/author\/kim"},"rttpg_comment":0,"rttpg_category":"<a href=\"https:\/\/incurelab.com\/wp\/category\/uncategorized\" rel=\"category tag\">Uncategorized<\/a>","rttpg_excerpt":"A solder joint rarely fails the day it’s made \u2014 it fails months later, after enough power-on and power-off cycles have fatigued the metal past its limit. Encapsulating the joint with the right adhesive is what keeps that clock from ever starting. Why Solder Joints Are the Weakest Point in Any Wire Harness In modern…","_links":{"self":[{"href":"https:\/\/incurelab.com\/wp\/wp-json\/wp\/v2\/posts\/9993","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/incurelab.com\/wp\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/incurelab.com\/wp\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/incurelab.com\/wp\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/incurelab.com\/wp\/wp-json\/wp\/v2\/comments?post=9993"}],"version-history":[{"count":3,"href":"https:\/\/incurelab.com\/wp\/wp-json\/wp\/v2\/posts\/9993\/revisions"}],"predecessor-version":[{"id":19838,"href":"https:\/\/incurelab.com\/wp\/wp-json\/wp\/v2\/posts\/9993\/revisions\/19838"}],"wp:attachment":[{"href":"https:\/\/incurelab.com\/wp\/wp-json\/wp\/v2\/media?parent=9993"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/incurelab.com\/wp\/wp-json\/wp\/v2\/categories?post=9993"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/incurelab.com\/wp\/wp-json\/wp\/v2\/tags?post=9993"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}