What does the Incure Perimeter™ PRM-REAR do?

The PRM-REAR is a supplemental tinted acrylic panel that secures under the F-Series™ stand's mounting feet to block the low-level backside UV radiation that the front shield alone does not cover — completing a fully enclosed cure station.

Do I need the PRM-REAR if I already have the PRM-FRONT?

The PRM-FRONT alone covers the direction the operator faces. Add the PRM-REAR when complete 360° shielding is desirable — for example, when personnel or equipment are positioned behind the lamp station on a shared production floor.

Which F-Series™ models is the PRM-REAR compatible with?

The PRM-REAR mounts to the shared F-Series™ stand rather than the individual lamp head, so one shield fits F100, F200, F200P, F400, and F500. It is not compatible with the F900P, which uses a different, larger stand.

Do I need tools to install the PRM-REAR?

No. The PRM-REAR slides into place under the F-Series™ stand's mounting feet and is held by the stand's own weight — no fasteners or tools required.

Does the PRM-REAR interfere with the front shield's tilt?

No. The PRM-REAR has flared sides purpose-built to clear the PRM-FRONT's tilt range, so both shields can be installed together without obstructing the lamp's normal adjustment.

Rear UV Shield — Incure Perimeter™ PRM-REAR

Name: Incure Perimeter™ PRM-REAR Rear UV Shield
Brand: Incure

Incure Perimeter™ PRM-REAR is the supplemental shield for F-Series™ flood lamps — where the PRM-FRONT contains scatter UV headed at the operator, the PRM-REAR secures under the stand's mounting feet to block the low-level backside radiation the front shield alone leaves exposed, completing a full-perimeter enclosure without tools or fasteners.

Completes Full-Perimeter UV Containment

The PRM-FRONT blocks scatter UV headed at the operator; the PRM-REAR blocks the low-level backside radiation the front shield alone does not cover. Add it when personnel or equipment share the space behind the F-Series™ station and complete 360° enclosure is desirable.

Full Enclosure Without Losing Lamp Tilt Access

Flared side panels are purpose-built to clear the PRM-FRONT's normal tilt adjustment, so both shields install together without either obstructing the other or restricting the lamp's usual range of motion.

No Attachment Point Needed — Unlike the PRM-FRONT's Handle

The PRM-FRONT lifts on and off by an integrated carry handle; the PRM-REAR needs no hardware on the shield itself — it slides under the F-Series™ stand's mounting feet and is held in place by the stand's own weight alone.

Incure Perimeter™ PRM-REAR tinted acrylic rear UV shield with flared side panels

Product Specification — PRM-REAR Rear UV Shield
Model	PRM-REAR
Material	Tinted Acrylic
Mounting	Secures under stand mounting feet; flared sides clear front shield tilt
Weight	6 lbs
Dimensions (W × D × H)	13 × 11 × 5 in
Installation	No tools — slides into place under stand feet
Compatible F-Series™ Models	F100 · F200 · F200P · F400 · F500
Compatible Accessory	Incure Perimeter™ PRM-FRONT (required as primary containment)
Best For	Supplemental backside containment for full enclosure
Typical Applications
Shared Production Floors	Blocks backside UV where personnel work behind the lamp station
Multi-Operator Assembly Cells	Completes full enclosure on stations shared from multiple sides
UV Safety Program Documentation	Supports facility UV exposure and PPE compliance programs
Ordering
P/N	PRM-REAR

The Incure Perimeter™ PRM-REAR is compatible with all stand-mounted F-Series™ models — F100, F200, F200P, F400, and F500. It is not compatible with the F900P, which uses a different, larger stand. The PRM-REAR is a supplemental accessory — see PRM-FRONT for primary front-of-lamp containment.