UV LED Focused Beam Conveyor Curing System — Incure CDM™ + M62
Incure CDM™ M62 doubles the beam depth of the CDM™ + M51 — a UV LED focused beam conveyor curing system pairing the CDM™ conveyor with a 6″×2″ strip beam that covers wider bond interfaces than the M51's 5″×1″ strip without irradiating components outside the beam footprint. Delivered as a complete system, it provides 3,100 mW/cm² at 365 nm across the 6″×2″ strip, belt-speed dose control from 7,750 to 62,000 mJ/cm² UVA, PLC / RS-232 / foot-switch integration, and >20,000-hour LED service life at up to 2-inch maximum part width.
Cures 2-Inch Bond Interfaces the CDM™ + M51 Cannot Cover in One Pass
The CDM™ + M51 covers a 1-inch-wide beam path. Parts with bond interfaces wider than 1 inch — gasket rings, edge-bonded laminates, multi-joint substrates — require repositioning or multiple passes to fully expose the bond face. The CDM™ + M62 doubles that beam depth to 2 inches, curing the full bond interface in a single conveyor pass at the same 6-inch illuminated length along the belt travel direction.
Wider Coverage Without Over-Irradiating the Surrounding Assembly
Flood configurations on the CDM™ cure everything within their footprint. The M62 maintains focused-beam selectivity — concentrating 108 LEDs into a 6″×2″ strip so components outside the 2-inch beam width remain unexposed. This makes the CDM™ + M62 the right choice when the assembly has adjacent heat-sensitive or pre-bonded components that must stay outside the UV zone during inline cure.
3,100 mW/cm² Across the Full 6″×2″ Strip — 108 LEDs at 365 nm
108 LEDs deliver 3,100 mW/cm² at 365 nm uniformly across the complete 6″×2″ (152 mm × 51 mm) curing footprint. At 6 ft/min, the belt delivers 15,500 mJ/cm² UVA to the bond line per pass. Belt speed is adjustable from 1.5 to 12 ft/min, scaling dose from 62,000 mJ/cm² UVA at the slowest setting to 7,750 mJ/cm² UVA at the fastest.
| Lamp Head | |
| Model | M62 |
| Beam Format | 6″ × 2″ (152 mm × 51 mm) strip |
| LED Array | 108 LEDs |
| Available Wavelengths | 365 nm · 385 nm · 395 nm · 405 nm (factory-configured at order) |
| Cooling | Advanced forced-air |
| Curing Performance | |
| Peak Intensity @ 365 nm, 2″ | 3,100 mW/cm² |
| Peak Intensity @ 385/395/405 nm, 2″ | 2,600 mW/cm² |
| Curing Energy @ 1.5 ft/min (slowest) | 62,000 mJ/cm² UVA · 52,000 mJ/cm² UVV |
| Curing Energy @ 6.0 ft/min (nominal) | 15,500 mJ/cm² UVA · 13,000 mJ/cm² UVV |
| Curing Energy @ 12.0 ft/min (fastest) | 7,750 mJ/cm² UVA · 6,500 mJ/cm² UVV |
| Light Source Useful Life | > 20,000 hours |
| Typical Intensity Loss Over Useful Life | ≤ 20% |
| Conveyor Platform | |
| Belt Material | 9″ Polypropylene — anti-static option available |
| Belt Speed | 1.5–12.0 ft/min (adjustable) |
| Maximum Part Width | 2 inches (51 mm) |
| Conveyor Curing Height | 0.5″–2.0″ (adjustable) |
| Mounting Stand | Optional |
| Control & Power | |
| External Control | PLC · RS-232 · Foot Switch |
| Operating Mode | Timer / Continuous (switchable) |
| Power Input | 100–240 V, 50/60 Hz, auto-ranging |
| Ordering | |
| P/N at 365 nm | CDM-1xM62-365 |
| P/N at 385 nm | CDM-1xM62-385 |
| P/N at 395 nm | CDM-1xM62-395 |
| P/N at 405 nm | CDM-1xM62-405 |
LED curing energy values are estimated based on measured irradiance profile, illuminated length in the belt-travel direction (6 inches), and belt speed. Actual dose may vary depending on working distance, beam profile, part height, reflectivity, and measurement method. The 2-inch maximum part width specification refers to the width of the cured zone — areas outside the 2-inch beam width are not cured in a single pass. UVV values are estimated at 385/395/405 nm wavelength configurations. Per-configuration wattage, machine dimensions, and weight available on request. Wavelength is factory-configured at time of order — contact Incure for wavelength selection guidance based on adhesive photoinitiator absorption peak.
