Back to Floor-Standing Centrifuges FluxPro UF-675 — Technical Datasheet Brochure (PDF)

FluxPro UF-675 — Floor-Standing Low-Speed Centrifuge, 4 × 750 ml

Low speed refrigerated centrifuge UF-675 is typically used in scientific research and medical laboratories to separate substances of different densities in a sample. The refrigeration feature allows for temperature control during the separation process, which is important for maintaining the integrity of certain samples.

Design

  • Metal housing, metal lid, and stainless steel centrifuge chamber are autoclave-able and resistant detergents and disinfection liquids.
  • Observations window on lid for speed calibration and noise measurement.
  • Microprocessor control with frequency conversion A.C. motor drive
  • LCD Display the parameters of Speed, Timer, RCF, Rotors, Program(Memory), Acceleration& Deceleration information and Error code information.

User friendly

  • CFC free refrigeration system, Pre-cooling feature, Precise temperature control up to – 20°C.
  • Programmable and storable, stores up to 30 programs and provides direct user access with one keystroke save. The stored parameter: combination remains in the memory even after the centrifugation has been switched off.
  • Provides the 10 acceleration rates and 10 braking ramp, to effectively avoid secondary sedimentation, with better centrifugation effect.
  • Automatic lid-locking and holding during rotor run

Safety

  • Produced according to international safety regulations (e.g. IEC 61010)
  • Safety Electrical lid interlock,door can not open when rotor is running and machine won’t run when lid open and error code appears.
  • Emergency lid-lock release when power failure(very useful in an unexpected power interruption).
  • Gas hinge for lid drop protection.
FluxPro UF-675 Floor-Standing Low-Speed Centrifuge, 4 × 750 ml
Specifications
ModelFluxPro UF-675
TypeFloor-Standing Low-Speed Centrifuge, 4 × 750 ml
Speed Range0-6000 rpm adjustable
Max Speed6000 rpm
Speed Accuracy±10r/min
Max Capacity4 × 750 ml
RCF Range0-4752 ×g adjustable
Max RCF4752 ×g
Timer1s-99minutes adjustable
DisplayLCD
Noise< 58 dB(A)
Acceleration / Deceleration Rates1-10 rates
Temperature Range-20 °C to +40 °C
Temperature Accuracy±1 °C
Dimensions (L × W × H)735 × 690 × 400 mm (L × W × H)
Net Weight100 kg
Power SupplyAC220V,50Hz,10A, 1300W
Matched RotorsFixed angle rotors&swing out rotors
CertificationCE, ISO13485,ISO9001, SFDA
Rotors & Accessories
NO.1 Angle rotor12x15/10/5ml · 6000r/min · 4588xg · PP/PC tube
Adapter 12x2ml · PP/PC tube
NO.2 Swing rotorsteel frame rotor · 5000r/min · 4752xg · PP/PC tube
Swing frame 4x100ml · PP/PC tube
Swing frame 4x50ml · PP/PC tube
Adapter 4x15/10ml · PP/PC tube
NO.3 Swing rotorsteel frame rotor · 4000r/min · 3041xg · PP/PC tube
Swing frame 4x2x100ml · PP/PC tube
Swing frame 4x2x50ml · PP/PC tube
Adapter 4x2x15/10ml · PP/PC tube
Swing frame 4x8x15/10/5ml · PP/PC tube
Rack 4×12×5/2ml · PP/PC tube
NO.4 Swing bucket4x18x5/2ml · 4000r/min · 2773xg · Vacuum blood collection tubes
N0.5 Swing bucket4×600ml · 4000r/min · 3354xg · Square cup
Adapter 4×25×5/2ml · Vacuum blood collection tubes
Adapter 4×12×15/10ml · PP/PC tube
Adapter 4×5×50ml · PP/PC tube
Adapter 4×4×100ml · PP/PC tube
NO.6 Swing bucket4×500ml · 4000r/min · 3354xg · Round cup
Adapter 4×17×5/2ml · PP/PC tube
Adapter 4×8×15/10ml · PP/PC tube
Adapter 4×3×50ml · PP/PC tube
Adapter 4×100ml · PP/PC tube
NO.7 Swing bucket4×750ml · 4000r/min · 3400xg · Round cup
Adapter 4×26×5/2ml · PP/PC tube
Adapter 4×13×15/10ml · PP/PC tube
Adapter 4×5×50ml · PP/PC tube
Adapter 4×3×100ml · PP/PC tube
NO.8 Microplate rotor2×2×96 hole · 4200r/min · 2860xg · Square cup
Adapter 2×32×1.5ml · PP/PC tube
Ordering
Part NumberUF-675
Lead Time4–6 weeks ARO

Specifications as published by the manufacturer; subject to change without notice. Contact support@uv-incure.com to confirm rotor configuration for your tubes and volumes.