Incure C191C is the large-format chamber in the C-Series™ — the only C-Series™ enclosure matched to the larger L-Series™ UV LED flood lamps (L88, L1010, L1212, and L1414) whose curing footprints exceed the 4-inch × 4-inch maximum of the L44. Where the C131C and C141C accept only L11 through L44, the C191C's 19.7″ × 19.7″ floor area accommodates L-Series arrays from 8-inch × 8-inch up to 14-inch × 14-inch — providing a fully enclosed, UV-shielded curing environment for production-scale LED flood processes that would otherwise require an open-bench setup.

The Only C-Series™ Chamber Built for L88, L1010, L1212, and L1414

No other C-Series™ chamber accepts an L88 or larger LED flood lamp. The C131C and C141C both cap out at L44 — a 4-inch × 4-inch footprint. The C191C's 19.7-inch internal floor accommodates the L88 (8″×8″), L1010 (10″×10″), L1212 (12″×12″), and L1414 (14″×14″) — the full upper range of the L-Series™ that is used for PCB panel-scale curing, conformal coating sections, and large-area gasket and potting processes. For any process using these lamps that requires a controlled, UV-shielded enclosure, the C191C is the designated chamber.

Brings a Controlled Curing Environment to Production-Scale LED Processes

Large-format UV LED flood lamps (L88 and above) are most commonly deployed in open-bench configurations where the lamp head is suspended above the part. The C191C replaces the open bench with a fully enclosed chamber — providing 360° UV shielding, drawer-activated UV shut-off, and foot-switch / PLC / RS-232 control integration — without requiring the engineer to move to a smaller lamp to gain enclosure safety. Forced-air cooling keeps the lamp and chamber at stable operating temperature across extended batch cycles.

19.7″ × 19.7″ × 13.8″ Internal Space — The Largest C-Series™ Chamber

Internal curing dimensions: 19.7″ × 19.7″ × 13.8″ (500 mm × 500 mm × 351 mm); external: 22.4″ × 22.4″ × 15.7″ (569 mm × 569 mm × 399 mm). Compatible with L88, L1010, L1212, and L1414 UV LED flood lamps. Adjustable shelf; drawer-activated UV shut-off; foot-switch / PLC / RS-232 control interface; forced-air cooling with louvers. No integrated temperature sensor.

The C191C is compatible with L88, L1010, L1212, and L1414 UV LED flood lamps only. For L11, L22, L33, or L44 lamps — which fit within a 4-inch × 4-inch footprint — specify the C131C (7.1″ × 7.1″ × 7.1″) or C141C (11.8″ × 11.8″ × 11.8″). For flat substrates requiring horizontal drawer loading with L11–L44, specify the C131D (11.8″ × 11.8″ × 3.1″ drawer). The C191C has no chamber-compatible lamp in the L64 range (6″×4″) — the L64 is not a compatible lamp for either the C131/C141 or C191 chamber series.

Related Products

Incure L-Series™ Flood Lamps

L88, L1010, L1212, and L1414 all fit this chamber's footprint.

Incure W1212 Water-Cooled UV LED System

This is the only chamber sized for the W1212's full 12″×12″ water-cooled array.

Vison™ UV Eyewear

ANSI Z87.1 / EN166 eyewear rated for the lamp heads this chamber houses.