General Purpose Cyanoacrylate Adhesives — Quik-Fix™
Ten single-component instant adhesives for everyday industrial bonding — from 2 cP liquids for close-fitting parts to a 10,000 cP non-drip gel, with dedicated rubber and EPDM bonders, a low odour / low blooming grade and a toughened, impact resistant grade.
Technical Specifications
Everyday Industrial Bonding
Quik-Fix™ grades cover the most common instant-adhesive jobs —
pick by viscosity, set speed and the materials you are joining.
Frequently Asked Questions
Common questions about Incure Quik-Fix™ general purpose cyanoacrylate adhesives.
-
Quik-Fix™ is Incure’s general purpose cyanoacrylate (instant adhesive) range: ten single-component grades, ethyl cyanoacrylate except low odour QF-5L (ethoxyethyl cyanoacrylate), from 2 cP liquids to a 10,000 cP non-drip gel.
-
QF-2R (2 cP) is formulated for rubber, EPDM and other difficult-to-bond materials and sets in about 3 seconds on EPDM. QF-10 (10 cP) and QF-750 (750 cP) are non-stringy rubber bonders that set in about 2 seconds on EPDM.
-
QF-2000 (2,000 cP) is a high viscosity, gap-filling, non-stringy grade. QF-10000G is a non-drip gel (10,000 cP) for vertical and overhead surfaces.
-
Yes. QF-5L is an ethoxyethyl cyanoacrylate with low odour and low blooming (white residue around the bond line). Viscosity 5 cP, flash point 112°C, tensile shear strength 1,740 PSI on steel.
-
Set times on steel range from about 15 seconds (QF-2V) to 60 seconds (QF-5L). Tensile shear strength on steel is 2,175 PSI for most grades, 1,740 PSI for QF-5L and 4,060 PSI for toughened QF-2500T. Data per JIS K6861 at 23°C / 50% RH.
-
No. Quik-Fix™ grades are industrial adhesives and have not been tested to ISO 10993. For medical device assembly, see Incure Cyro-Weld™ medical cyanoacrylates.