FluxPro UM-100 — Cytospin Slide Centrifuge, 12-place
Samples taken by the cervical brush.The impurities are separated by gradient centrifugation. Then make the effective diagnostic components (cells and bacteria) into flat uniform layer without overlapping by centrifuge. The ultra thin layer absorbed on glass slide for microscope examination or computer reading. 12 samples can be made in 5 minutes. Easy to use without pollution. Cell layer made even with clear background.
Design
- Microprocessor control, flexible shaft drive system to directly drive the turning head, smooth running, small vibration, low noise.
- Frequency conversion motor drive, touch color large screen display .
- LCD display the parameters of Speed ,Timer,RCF,Program(Memory)information.
User friendly
- Automatic lid-locking and holding during rotor run.
- "Mute" patented technology, the highest speed operation is less than 55 decibels.
- Automatic rpm/rcf conversion.
Safety
- Produced according to international safety regulations (e.g. IEC 61010)
- Safety Electrical lid interlock,door can not open when rotor is running and machine won’t run when lid open and error code appears.
- Emergency lid-lock release when power failure(very useful in an unexpected power interruption).
- Safety protections are made for the electronic door lock, over speed,fault auto diagnosis etc to ensure the man machine safety.
| Specifications | |
| Model | FluxPro UM-100 |
| Type | Cytospin Slide Centrifuge, 12-place |
| Speed Range | 0-1200 rpm adjustable |
| Max Speed | 1200 rpm |
| Max Capacity | 12 cell slide clips |
| RCF Range | 0-241 ×g adjustable |
| Max RCF | 241 ×g |
| Display | LCD |
| Noise | ≤ 55 dB(A) |
| Dimensions (L × W × H) | 500 × 410 × 250 mm |
| Net Weight | 22 kg |
| Power Supply | AC220V,50Hz,5A,60W |
| Matched Rotors | Swing rotor of settlement type |
| Certification | CE, ISO13485,ISO9001:2015 |
| Rotors & Accessories | |
| NO.1 Swing rotor | 12 cell slide clips · 2000r/min · 230xg · Swing rotor of settlement type |
| Ordering | |
| Part Number | UM-100 |
| Lead Time | 4–6 weeks ARO |
Specifications as published by the manufacturer; subject to change without notice. Contact support@uv-incure.com to confirm rotor configuration for your tubes and volumes.
