L9000-BASE — UV LED Spot Curing Controller (Base Unit)
Incure L9000-BASE is the controller behind every L9000 configuration. Purchase separately and pair with the lightguide the application requires — Cool Guide for tight-access geometries, Short Guide for standard bench-top, Long Guide for deep-reach automated lines. When the application changes, swap the guide; the controller stays. RS-232 port and programmable timer support manual single-button operation and fully automated line sequences from the same unit.
One Controller — Any L9000 Lightguide Configuration
The L9000-BASE accepts the Cool Guide, Short Guide, and Long Guide interchangeably. Start with the configuration the current application needs. When a new product family or fixture geometry arrives, connect a different guide — the controller, intensity settings, and timer programs carry over without recalibration or service. No new hardware required to change configurations.
One Controller Across Your Entire L9000 Lightguide Inventory
Supports up to 4 independent lightguides simultaneously — run four Cool Guides on four adjacent assemblies, or mix guide types across a multi-station fixture. Laboratories and production lines maintaining multiple part families can standardise on a single controller model; lightguides become the only configuration-specific consumable. Intensity and timing are programmable independently per trigger cycle, not per guide.
Up to 7,500 mW/cm² to Any Assembly at Any Wavelength From 365 to 405 nm
Factory-configured to a single wavelength at order (365 / 375 / 385 / 395 / 405 nm) — select the wavelength matching your adhesive's peak absorption. 10–100% intensity adjustable on the front panel or via RS-232. Programmable timer 0.1–999.9 s. 15,000-hour LED life — no recalibration at any stage; replace the LED light source module at end of life and resume production immediately.
| Specifications | |
| Model | L9000-BASE |
| System Type | UV LED Spot Curing Controller — No Lightguide Included |
| LED Wavelength | 365 nm / 375 nm / 385 nm / 395 nm / 405 nm (factory-configured at order) |
| Output & Control | |
| Peak UVA Irradiance (365 nm) | Up to 7,500 mW/cm² |
| Intensity Control | 10–100% user-adjustable |
| Activation Timer | 0.1–999.9 s programmable |
| Control Interface | LCD Front Panel; RS-232 Port |
| Lightguide Compatibility | |
| Lightguide Ports | Up to 4 Independent Simultaneous Lightguides |
| Compatible Lightguides | L9000-CG Cool Guide · L9000-SG Short Guide · L9000-LG Long Guide |
| Lightguide Cable Lengths | 2,000 mm / 3,000 mm / 5,000 mm |
| Durability | |
| LED Life | 15,000 hours (~1,875 working days at 8 hrs/day) |
| Recalibration Required | None — Calibration-Free Throughout Operating Life |
| End-of-Life Service | Replace LED Light Source Module; Resume Immediately |
| Physical | |
| Cooling | Forced Air With DC Fan |
| Ordering | |
| P/N Format | L9000-BASE-[Wavelength] |
| Wavelength Code | 365 / 375 / 385 / 395 / 405 |
| Example P/N | L9000-BASE-365 |
Peak UVA irradiance values at 100% output, 365 nm configuration, 9 mm focal point distance from lightguide tip to work surface. Irradiance decreases with focal point distance — see the L9000 listing page for the full focal point vs irradiance table. LED life is a rated operating value; actual life depends on operating intensity and thermal conditions.
