S20™ 3-Pole — Three-Point UV Arc Spot Curing Lamp
Incure S20-3P delivers matched UV irradiance to three lightguide tips simultaneously, curing three bond points in one trigger cycle. Powered by a 200W mercury arc lamp with broad-spectrum 300–550 nm output and a programmable 1–99 second timer, the S20-3P eliminates fixture repositioning on triangular layouts, connector potting, and any three-point assembly. Available with Ø3 mm lightguide tips in standard lengths of 1 m and 1.5 m.
Three Bond Points — One Trigger Cycle
Three lightguide tips fire simultaneously, curing three separate bond points in a single exposure. Eliminates fixture repositioning and reduces cycle time by up to two-thirds versus sequential single-point curing.
Eliminates Fixture Repositioning
All three cure points fire in the same trigger event. No indexing, no re-fixturing between points — ideal for triangular joint layouts, connector potting, and multi-joint assemblies where all three points must cure together.
Matched UV to All Three Tips
Equal power split to each lightguide output ensures a consistent UV dose at every cure point — all three joints cure to the same degree in the same exposure. Safety goggles included.
| Specifications | ||
| Model | S20-3P | |
| 100–120 VAC | 200–240 VAC | |
| AC Input Voltage | 100–120VAC ±10% | 200–240VAC ±10% |
| AC Input Current | 4.7 Amperes | 2.5 Amperes |
| Source Input Frequency | 47 Hz to 63 Hz | |
| Lamp Power Regulation | ±1.0% | |
| Fan / Auxiliary Voltage | 24V @ 0.5A | |
| Lamp Type | 200 Watt Mercury Arc | |
| Burning Position | Horizontal | |
| Radiation Flux | 300–550 nm | |
| Warm-up Time | 1 to 2 minutes | |
| Cooling Time Before Restart | 2 to 5 minutes typical | |
| Output Intensity (Typical) | >21 W/cm² UVA (at source) | |
| Output Intensity Range | 25–100% adjustable | |
| Timer Range | 1–99 seconds (programmable) | |
| Lamp Life | >2,000 hours typical | |
| Operating Temperature | +10°C to +40°C / +50°F to +104°F | |
| Relative Humidity | 30–75% operating, 10–100% storage | |
| Cooling | Dual DC Fans, Filtered | |
| Over-temp Shutdown | 65°C (internal) | |
| Lightguide Configuration — S20-3P | ||
| Lightguide Poles | Three-Pole (3 Outputs) | |
| Lightguide Type | UV Liquid Lightguide | |
| Tip Diameters Available | Ø3 mm | |
| Lightguide Lengths | 1 m, 1.5 m (custom available) | |
| Physical | ||
| L × W × H (Controller) | 10.6" × 8.7" × 4.1" | |
| Weight | 6.0 lbs (2.7 kg) | |
| Safety Equipment | UV Protective Goggles Included | |
| Ordering | ||
| P/N Format | S20-3P-[Length] | |
| Length Code (mm) | 1000 / 1500 | |
| Example P/N | S20-3P-1000 | |
Output intensity is measured at the lightguide tip with the system operating at 100% power. Actual irradiance may vary depending on lightguide length, tip diameter, and the condition of the lightguide and optical components.
