UV LED Flood Conveyor Curing System — Incure CDM™ + L88
Incure CDM™ L88 is the full-width configuration for parts the CDM™ + L64's 4-inch lane cannot clear — a UV LED flood conveyor curing system pairing the CDM™ 9″ polypropylene belt conveyor with an 8″×8″ flood head that covers round, irregular, and multi-row assemblies with no lane-width constraint. Delivered as a complete system — conveyor chassis plus lamp head — it provides 1,900 mW/cm² at 385/395/405 nm (1,600 mW/cm² at 365 nm) across the full 8″×8″ curing footprint at 2″ working distance, belt-speed dose control from 6,325 to 50,600 mJ/cm² UVA, PLC / RS-232 / foot-switch integration, and >20,000-hour LED service life for inline adhesive bonding, conformal coating, and encapsulant cure at up to 8″ maximum part width.
Doubles the Maximum Part Width — 8-Inch Parts That Cannot Fit the CDM™ + L64
The CDM™ + L64 cures assemblies up to 4 inches wide. CDM™ + L88 doubles that ceiling to 8 inches — handling wider PCB panels, multi-row SMT assemblies, and larger substrates that exceed the L64's lane width without requiring a second pass or a reconfigured conveyor.
Square 8″×8″ Format — No Part Shape Constraint on the Line
The L64's 6″×4″ non-square footprint is optimized for 4-inch PCB panel lanes. The L88's 8″×8″ square footprint covers every part orientation: round lenses, irregular-perimeter substrates, multi-row assemblies, and non-panel parts that the 4-inch lane constraint of the CDM™ + L64 cannot accommodate in a single conveyor pass.
1,900 mW/cm² Across the Full 8″×8″ Area — 2.67× More Coverage Than the CDM™ + L64
576 LEDs deliver 1,900 mW/cm² at 385/395/405 nm uniformly across the complete 8″×8″ (203 mm × 203 mm) curing footprint — 2.67 times the curing area of the 6″×4″ CDM™ + L64 configuration at the same peak intensity and belt-speed dose range.
| Lamp Head | |
| Model | L88 |
| Curing Area | 8″ × 8″ (203 mm × 203 mm) |
| LED Array | 576 LEDs |
| Available Wavelengths | 365 nm · 385 nm · 395 nm · 405 nm (factory-configured at order) |
| Curing Performance | |
| Peak Intensity @ 365 nm, 2″ | 1,600 mW/cm² |
| Peak Intensity @ 385/395/405 nm, 2″ | 1,900 mW/cm² |
| Curing Energy @ 1.5 ft/min (slowest) | 50,600 mJ/cm² UVA · 42,600 mJ/cm² UVV |
| Curing Energy @ 6.0 ft/min (nominal) | 12,650 mJ/cm² UVA · 10,650 mJ/cm² UVV |
| Curing Energy @ 12.0 ft/min (fastest) | 6,325 mJ/cm² UVA · 5,325 mJ/cm² UVV |
| Dynamic Uniformity @ 2″ on Conveyor | 0.89 |
| Static Uniformity @ 2″ on Conveyor | 0.80 |
| Light Source Useful Life | > 20,000 hours |
| Typical Intensity Loss Over Useful Life | ≤ 20% |
| Conveyor Platform | |
| Belt Material | 9″ Polypropylene — anti-static option available |
| Belt Speed | 1.5–12.0 ft/min (adjustable) |
| Maximum Part Width | 8 inches (203 mm) |
| Conveyor Curing Height | 0.5″–2.0″ (adjustable) |
| Mounting Stand | Optional |
| Cooling | Forced-air cooling |
| Control & Power | |
| External Control | PLC · RS-232 · Foot Switch |
| Operating Mode | Timer / Continuous (switchable) |
| Power Input | 100–240 V, 50/60 Hz, auto-ranging |
| Ordering | |
| P/N at 365 nm | CDM-1xL88-365 |
| P/N at 385 nm | CDM-1xL88-385 |
| P/N at 395 nm | CDM-1xL88-395 |
| P/N at 405 nm | CDM-1xL88-405 |
Peak intensity at 385/395/405 nm exceeds 365 nm output for the L88 array — this is a characteristic of LED die efficiency at these wavelengths. LED curing energy values are estimated based on measured irradiance profile, illuminated length in the belt-travel direction, and belt speed. Actual dose may vary depending on working distance, beam profile, part height, reflectivity, and measurement method. Uniformity values are typical measurements on the CDM™ conveyor, with ±5% measurement variation. Per-configuration wattage, machine dimensions, and weight available on request. Wavelength is factory-configured at time of order — contact Incure for wavelength selection guidance based on adhesive photoinitiator absorption peak.
